ACI PRC-347-04: Guide to Formwork for Concrete - Spanish Language
347S-04 Guía para el diseño, construcción y materiales de cimbras para concreto, versión en español

Currency Display

Your Price:$ 68.50 USD

Member Price: $ 42.00 USD

Save $ 26.50 USD, Become a Member

Choose Product Language

Choose Product Units


Choose Product Format


Notes/Preview

This is a licensed translation and has not been reviewed or approved by ACI.

Description

Objectives of safety, quality, and economy are given priority in these guidelines for formwork. A section on contract documents explains the kind and amount of specification guidance the engineer/architect should provide for the contractor. The remainder of the report advised the formwork engineer/contractor on the best ways to meet the specification requirements safely and economically. Separate chapters deal with design, construction, and materials for formwork. Considerations peculiar to architectural concrete are also outlined in a separate chapter. Other sections are devoted to formwork for bridges, shells, mass concrete, and underground work. The concluding chapter on formwork for special methods of construction includes slipforming, preplaced-aggregate concrete, tremie concrete, precast, and prestressed concrete.

Keywords: anchors; architectural concrete; coatings; concrete; construction; falsework; form ties; forms; formwork; foundations; quality control; reshoring; shoring; slipform construction; specifications; tolerances.

 

Document Details

Author: Translated by: IMCYC

Publication Year: 2014

Pages: 48

ISBN:

Categories: Formwork

Formats: PDF

Table of Contents

Chapter 1—Introduction

1.1—Scope

1.2—Definitions

1.3—Achieving economy in formwork

1.4—Contract documents

Chapter 2—Design

2.1—General

2.2—Loads

2.3—Unit stresses

2.4—Safety factors for accessories

2.5—Shores

2.6—Bracing and lacing

2.7—Foundations for formwork

2.8—Settlement

Chapter 3—Construction

3.1—Safety precautions

3.2—Construction practices and workmanship

3.3—Tolerances

3.4—Irregularities in formed surfaces

3.5—Shoring and centering

3.6—Inspection and adjustment of formwork

3.7—Removal of forms and supports

3.8—Shoring and reshoring of multistory structures

Chapter 4—Materials

4.1—General

4.2—Properties of materials

4.3—Accessories

4.4—Form coatings and release agents

Chapter 5—Architectural concrete

5.1—Introduction

5.2—Role of the architect

5.3—Materials and accessories

5.4—Design

5.5—Construction

5.6—Form removal

Chapter 6—Special structures

6.1—Discussion

6.2—Bridges and viaducts, including high piers

6.3—Structures designed for composite action

6.4—Folded plates, thin shells, and long-span roof structures

6.5—Mass concrete structures

6.6—Underground structures

Chapter 7—Special methods of construction

7.1—Recommendations

7.2—Preplaced-aggregate concrete

7.3—Slipforms

7.4—Permanent forms

7.5—Forms for prestressed concrete construction

7.6—Forms for site precasting

7.7—Use of precast concrete for forms

7.8—Forms for concrete placed under water

Chapter 8—References

8.1—Referenced standards and reports

8.2—Cited references

ERRATA INFO

Any applicable errata are included with individual documents at the time of purchase. Errata are not included for collections or sets of documents such as the ACI Collection. For a listing of and access to all product errata, visit the Errata page.

Return/Exchange Policy

Printed / Hard Copy Products: The full and complete returned product will be accepted if returned within 60 days of receipt and in salable condition. A 20% service charge applies. Return shipping fees are the customer’s responsibility.

Electronic /Downloaded Products & Online Learning Courses: These items are not eligible for return.

Subscriptions These items are not eligible for return.

Exchanges: Contact ACI’s Customer Services Department for options (+1.248.848.3800 – ACICustomerService@concrete.org).