ACI Global Home Middle East Region Portal Western Europe Region Portal
Email Address is required Invalid Email Address
In today’s market, it is imperative to be knowledgeable and have an edge over the competition. ACI members have it…they are engaged, informed, and stay up to date by taking advantage of benefits that ACI membership provides them.
Read more about membership
Learn More
Become an ACI Member
Topics In Concrete
Home > Frequently Asked Questions
In This Section
Frequently Asked Questions
Submit a Question
Search other resources on the ACI website for answers to technical questions
Q. Why is consolidation needed? A. A mass of freshly placed concrete is usually honeycombed with entrapped air voids that are larger than the intentionally entrained air voids. If allowed to harden in this condition, the concrete will be nonuniform, weak, porous, and poorly bonded to the reinforcement. It will also have a poor appearance. The mixture needs to be consolidated if it is to have the properties normally desired and expected of concrete (ACI 309R). Consolidation is the process of inducing a closer arrangement of the solid particles in freshly mixed concrete or mortar during placement by the reduction of voids, usually by vibration, centrifugation, rodding, tamping, or some combinations of these actions. Some uses of concrete do not allow adequate access for vibration to effect consolidation. For such circumstances, self-consolidating concrete can be produced. This concrete contains a high-range water-reducing admixture and flows under the action of gravity. Rather than slump, the measurement used for this concrete is slump flow, which is the diameter of spread. Many high-slump concretes will benefit from light vibration to expel residual entrapped air, but truly “self-consolidating” concrete, where nearly all the entrapped air escapes without consolidating effort, can be made when needed. References: SP-1(02); ACI PRC-309.5-22; ACI CT-23 Topics in Concrete: Concrete Fundamentals; Consolidation; Placing
Q. Why is consolidation needed?
A. A mass of freshly placed concrete is usually honeycombed with entrapped air voids that are larger than the intentionally entrained air voids. If allowed to harden in this condition, the concrete will be nonuniform, weak, porous, and poorly bonded to the reinforcement. It will also have a poor appearance. The mixture needs to be consolidated if it is to have the properties normally desired and expected of concrete (ACI 309R). Consolidation is the process of inducing a closer arrangement of the solid particles in freshly mixed concrete or mortar during placement by the reduction of voids, usually by vibration, centrifugation, rodding, tamping, or some combinations of these actions.
Some uses of concrete do not allow adequate access for vibration to effect consolidation. For such circumstances, self-consolidating concrete can be produced. This concrete contains a high-range water-reducing admixture and flows under the action of gravity. Rather than slump, the measurement used for this concrete is slump flow, which is the diameter of spread. Many high-slump concretes will benefit from light vibration to expel residual entrapped air, but truly “self-consolidating” concrete, where nearly all the entrapped air escapes without consolidating effort, can be made when needed.
References: SP-1(02); ACI PRC-309.5-22; ACI CT-23
Topics in Concrete: Concrete Fundamentals; Consolidation; Placing