Title:
Influence of Cement on Properties of Fly-Ash-Based Concrete
Author(s):
Zhang Hongen, Jiang Feng, Wang Qingyuan, Tang Ling, and Shi Xiaoshuang
Publication:
Materials Journal
Volume:
114
Issue:
5
Appears on pages(s):
745-753
Keywords:
compressive strength; low-calcium fly ash; microstructure; thermogravimetric analysis (TGA); X-ray diffraction (XRD)
DOI:
10.14359/51700793
Date:
9/1/2017
Abstract:
Fly ash-based geopolymer concrete (FAGC) has been widely recognized in engineering for its environmentally friendly feature. However, the application is limited due to the high-temperature curing condition. This paper attempts to find a measurement to make it possible to cure low-calcium FAGC at ambient temperature. In this study, low-calcium fly ash was substituted with cement by 0, 5, and 10% in weight. One batch of specimens were cured at 176°F (80°C), the other batch of specimens were cured at 68°F (20°C). The acting mechanism of cement was illustrated in terms of slump, compressive strength, and microstructure. The results demonstrated that the optimum use ratio of cement was 5%, which could significantly improve microstructure and the properties of low-calcium FAGC. Additionally, appropriate ordinary portland cement (OPC) content could make it feasible to cure the geopolymer concrete at ambient temperature.
Related References:
1. Behera, M.; Bhattacharyya, S. K.; Minocha, A. K.; Deoliya, R.; and Maiti, S., “Recycled Aggregate from C&D Waste & Its Use in Concrete—A Breakthrough towards Sustainability in Construction Sector: A Review,” Construction and Building Materials, V. 68, 2014, pp. 501-516. doi: 10.1016/j.conbuildmat.2014.07.003
2. Berndt, M. L., “Properties of Sustainable Concrete Containing Fly Ash, Slag and Recycled Concrete Aggregate,” Construction and Building Materials, V. 23, No. 7, 2009, pp. 2606-2613. doi: 10.1016/j.conbuildmat.2009.02.011
3. Shi, X. S.; Collins, F. G.; Zhao, X. L.; and Wang, Q. Y., “Mechanical Properties and Microstructure Analysis of Fly Ash Geopolymeric Recycled Concrete,” Journal of Hazardous Materials, V. 237-238, 2012, pp. 20-29. doi: 10.1016/j.jhazmat.2012.07.070
4. Deb, P. S.; Nath, P.; and Sarker, P. K. “The Effects of Ground Granulated Blast-Furnace Slag Blending with Fly Ash and Activator Content on the Workability and Strength Properties of Geopolymer Concrete Cured at Ambient Temperature,” Materials & Design, V. 62, 2014, pp. 32-39.
5. Duxson, P.; Provis, J. L.; Lukey, G. C.; and van Deventer, J. S. J., “The Role of Inorganic Polymer Technology in the Development of ‘Green Concrete’,” Cement and Concrete Research, V. 37, No. 12, 2007, pp. 1590-1597. doi: 10.1016/j.cemconres.2007.08.018
6. Bakharev, T., “Durability of Geopolymer Materials in Sodium and Magnesium Sulfate Solutions,” Cement and Concrete Research, V. 35, No. 6, 2005, pp. 1233-1246. doi: 10.1016/j.cemconres.2004.09.002
7. Chindaprasirt, P., and Chalee, W., “Effect of Sodium Hydroxide Concentration on Chloride Penetration and Steel Corrosion of Fly Ash-Based Geopolymer Concrete under Marine Site,” Construction and Building Materials, V. 63, 2014, pp. 303-310. doi: 10.1016/j.conbuildmat.2014.04.010
8. Guo, X.; Shi, H.; and Dick, W. A., “Compressive Strength and Microstructural Characteristics of Class C Fly Ash Geopolymer,” Cement and Concrete Composites, V. 32, No. 2, 2010, pp. 142-147. doi: 10.1016/j.cemconcomp.2009.11.003
9. Sufian Badar, M.; Kupwade-Patil, K.; Bernal, S. A.; Provis, J. L.; and Allouche, E. N., “Corrosion of Steel Bars Induced by Accelerated Carbonation in Low and High Calcium Fly Ash Geopolymer Concretes,” Construction and Building Materials, V. 61, 2014, pp. 79-89. doi: 10.1016/j.conbuildmat.2014.03.015
10. Sindhunata, J.; van Deventer, J. S. J.; Lukey, G. C.; and Xu, H., “Effect of Curing Temperature and Silicate Concentration on Fly-Ash-Based Geopolymerization,” Industrial & Engineering Chemistry Research, V. 45, No. 10, 2006, pp. 3559-3568. doi: 10.1021/ie051251p
11. Leong, H. Y.; Ong, D. E. L.; Sanjayan, J. G.; and Nazari, A., “The Effect of Different Na2O and K2O Ratios of Alkali Activator on Compressive Strength of Fly Ash Based-Geopolymer,” Construction and Building Materials, V. 106, 2016, pp. 500-511. doi: 10.1016/j.conbuildmat.2015.12.141
12. de Vargas, A. S.; Dal Molin, D. C. C.; Masuero, Â. B.; Vilela, A. C. F.; Castro-Gomes, J.; and de Gutierrez, R. M., “Strength Development of Alkali-Activated Fly Ash Produced with Combined NaOH and Ca(OH)2 Activators,” Cement and Concrete Composites, V. 53, 2014, pp. 341-349. doi: 10.1016/j.cemconcomp.2014.06.012
13. Singhal, A.; Tewari, V. K.; and Prakash, S., “Utilization of Treated Spent Liquor Sludge with Fly Ash in Cement and Concrete,” Building and Environment, V. 43, No. 6, 2008, pp. 991-998. doi: 10.1016/j.buildenv.2007.02.002
14. Mazloom, M.; Ramezanianpour, A. A.; and Brooks, J. J., “Effect of Silica Fume on Mechanical Properties of High-Strength Concrete,” Cement and Concrete Composites, V. 26, No. 4, 2004, pp. 347-357. doi: 10.1016/S0958-9465(03)00017-9
15. Chidiac, S. E., and Panesar, D. K., “Evolution of Mechanical Properties of Concrete Containing Ground Granulated Blast Furnace Slag and Effects on the Scaling Resistance Test at 28 Days,” Cement and Concrete Composites, V. 30, No. 2, 2008, pp. 63-71. doi: 10.1016/j.cemconcomp.2007.09.003
16. Pangdaeng, S.; Phoo-ngernkham, T.; Sata, V.; and Chindaprasirt, P., “Influence of Curing Conditions on Properties of High Calcium Fly Ash Geopolymer Containing Portland Cement as Additive,” Materials & Design, V. 53, 2014, pp. 269-274. doi: 10.1016/j.matdes.2013.07.018
17. de Vargas, A. S.; Dal Molin, D. C. C.; Vilela, A. C. F.; Silva, F. J.; Pavão, B.; and Veit, H., “The Effects of Na2O/SiO2 Molar Ratio, Curing Temperature and Age on Compressive Strength, Morphology and Microstructure of Alkali-Activated Fly Ash-Based Geopolymers,” Cement and Concrete Composites, V. 33, No. 6, 2011, pp. 653-660. doi: 10.1016/j.cemconcomp.2011.03.006
18. Phoo-ngernkham, T.; Chindaprasirt, P.; Sata, V.; Pangdaeng, S.; and Sinsiri, T., “Properties of High Calcium Fly Ash Geopolymer Pastes with Portland Cement as an Additive,” International Journal of Minerals Metallurgy and Materials, V. 20, No. 2, 2013, pp. 214-220. doi: 10.1007/s12613-013-0715-6
19. Hu, C., “Microstructure and Mechanical Properties of Fly Ash Blended Cement Pastes,” Construction and Building Materials, V. 73, 2014, pp. 618-625. doi: 10.1016/j.conbuildmat.2014.10.009
20. Igarashi, S.; Kawamura, M.; and Watanabe, A., “Analysis of Cement Pastes and Mortars by a Combination of Backscatter-Based SEM Image Analysis and Calculations Based on the Powers Model,” Cement and Concrete Composites, V. 26, No. 8, 2004, pp. 977-985. doi: 10.1016/j.cemconcomp.2004.02.031
21. Guo, X.; Shi, H.; Chen, L.; and Dick, W. A., “Alkali-Activated Complex Binders from Class C Fly Ash and Ca-Containing Admixtures,” Journal of Hazardous Materials, V. 173, No. 1-3, 2010, pp. 480-486. doi: 10.1016/j.jhazmat.2009.08.110
22. Abdulkareem, O. A.; Mustafa Al Bakri, A. M.; Kamarudin, H.; Khairul Nizar, I.; and Saif, A. A., “Effects of Elevated Temperatures on the Thermal Behavior and Mechanical Performance of Fly Ash Geopolymer Paste, Mortar and Lightweight Concrete,” Construction and Building Materials, V. 50, 2014, pp. 377-387. doi: 10.1016/j.conbuildmat.2013.09.047
23. Kumar, S.; Kumar, R.; and Mehrotra, S. P., “Influence of Granulated Blast Furnace Slag on the Reaction, Structure and Properties of Fly Ash Based Geopolymer,” Journal of Materials Science, V. 45, No. 3, 2010, pp. 607-615. doi: 10.1007/s10853-009-3934-5
24. Chindaprasirt, P.; De Silva, P.; Sagoe-Crentsil, K.; and Hanjitsuwan, S., “Effect of SiO2 and Al2O3 on the Setting and Hardening of High Calcium Fly Ash-Based Geopolymer Systems,” Journal of Materials Science, V. 47, No. 12, 2012, pp. 4876-4883. doi: 10.1007/s10853-012-6353-y
25. Diamond, S., “The Microstructure of Cement Paste and Concrete––A Visual Primer,” Cement and Concrete Composites, V. 26, No. 8, 2004, pp. 919-933. doi: 10.1016/j.cemconcomp.2004.02.028
26. Rodríguez, E. D.; Bernal, S. A.; Provis, J. L.; Paya, J.; Monzo, J. M.; and Borrachero, M. V., “Effect of Nanosilica-Based Activators on the Performance of an Alkali-Activated Fly Ash Binder,” Cement and Concrete Composites, V. 35, No. 1, 2013, pp. 1-11. doi: 10.1016/j.cemconcomp.2012.08.025
27. Palomo, A.; Fernández-Jiménez, A.; Kovalchuk, G.; Ordoñez, L. M.; and Naranjo, M. C., “OPC-Fly Ash Cementitious Systems: Study of Gel Binders Produced during Alkaline Hydration,” Journal of Materials Science, V. 42, No. 9, 2007, pp. 2958-2966. doi: 10.1007/s10853-006-0585-7
28. Phair, J. W., and Van Deventer, J. S. J., “Effect of the Silicate Activator pH on the Microstructural Characteristics of Waste-Based Geopolymers,” International Journal of Mineral Processing, V. 66, No. 1-4, 2002, pp. 121-143. doi: 10.1016/S0301-7516(02)00013-3
29. Palomo, A.; Grutzeck, M. W.; and Blanco, M. T., “Alkali-Activated Fly Ashes: A Cement for the Future,” Cement and Concrete Research, V. 29, No. 8, 1999, pp. 1323-1329. doi: 10.1016/S0008-8846(98)00243-9
30. Hu, C.; Han, Y.; Gao, Y.; Zhang, Y.; and Li, Z., “Property Investigation of Calcium-Silicate-Hydrate (C-S-H) Gel in Cementitious Composites,” Materials Characterization, V. 95, 2014, pp. 129-139. doi: 10.1016/j.matchar.2014.06.012
31. Duxson, P.; Lukey, G. C.; and van Deventer, J. S. J., “Physical Evolution of Na-Geopolymer Derived from Metakaolin up to 1000°C,” Journal of Materials Science, V. 42, No. 9, 2007, pp. 3044-3054. doi: 10.1007/s10853-006-0535-4
32. Duxson, P.; Lukey, G. C.; and van Deventer, J. S. J., “The Thermal Evolution of Metakaolin Geopolymers: Part 2—Phase Stability and Structural Development,” Journal of Non-Crystalline Solids, V. 353, No. 22-23, 2007, pp. 2186-2200. doi: 10.1016/j.jnoncrysol.2007.02.050
33. Ranjbar, N.; Mehrali, M.; Alengaram, U. J.; Metselaar, H. S. C.; and Jumaat, M. Z., “Compressive Strength and Microstructural Analysis of Fly Ash/Palm Oil Fuel Ash Based Geopolymer Mortar under Elevated Temperatures,” Construction and Building Materials, V. 65, 2014, pp. 114-121. doi: 10.1016/j.conbuildmat.2014.04.064
34. Ylmén, R.; Jäglid, U.; Steenari, B.-M.; and Panas, I., “Early Hydration and Setting of Portland Cement Monitored by IR, SEM and Vicat Techniques,” Cement and Concrete Research, V. 39, No. 5, 2009, pp. 433-439. doi: 10.1016/j.cemconres.2009.01.017