Title:
Sensitivity of Compressive Strength of HSC to Hot-dry Climate, Curing Regimes, and Additives
Author(s):
Saleh H. Alsyed
Publication:
Materials Journal
Volume:
94
Issue:
6
Appears on pages(s):
472-477
Keywords:
compressive strength; concretes; cubes; curing; cylinders;
plasticizers; plastics, polymers, and resins; retardants; silica fume;
specimens; superplasticizers; tests;
DOI:
10.14359/330
Date:
11/1/1997
Abstract:
Seventy 152 mm (6 in.) concrete cubes and fifteen 152 ¥305 mm (6 ¥ 12 in.) cylinders of high-strength concrete were cast and tested. The influence of different curing methods on reducing the deleterious impact of adverse climatic conditions on the compressive strength was evaluated. Other variables considered in the study were the shape of the specimens, addition of silica fume, type of curing compound, curing period, and replacement of superplasticizer by retardant and plasticizer. It was found that, for concrete tested 28 days after casting, treatment with resin compound applied to the exposed surface of the specimen provided better protection to concrete than intermittent spraying of water. However, intermittent spraying of water with and without burlap covering also provided an acceptable means of protecting concrete against adverse climatic conditions. It was also found that adding 10 percent of silica fume to the concrete mix may increase the compressive strength of the concrete by 25 percent without influencing its sensitivity to hot weather effects. On the other hand, replacing superplasticizer by an equivalent quantity of retardant and plasticizer (based on equal concrete slump) reduced the compressive strength by about 10 percent but the concrete became less sensitive to adverse climatic conditions. Furthermore, for concrete tested 90 days after casting, it became visible that concrete cured by intermittent spraying of water with burlap covering had a higher compressive strength than that cured by water spraying with no burlap covering.*