Title:
Database of Shear Tests for Non-slender Reinforced Concrete Beams without Stirrups
Author(s):
Karl-Heinz Reineck and Leonardo Todisco
Publication:
Structural Journal
Volume:
111
Issue:
6
Appears on pages(s):
1363-1372
Keywords:
beams; database; reinforced concrete; shear reinforcement; shear slenderness; shear strength; shear tests; strut-and-tie models
DOI:
10.14359/51686820
Date:
11/1/2014
Abstract:
A database is presented with shear tests on non-slender beams without stirrups subjected to point loads with shear span to effective depth ratios (a/d) < 2.4. From the 338 collected shear tests, 222 tests remained for the evaluations after several selection
criteria were applied. The tests were compared with the left part of the shear valley by Kani and did not confirm the strength increase up to the flexural strength in the range from a/d = 2.4 to approximately 1.0. The capacities of the simple strut-and-tie model according to Appendix A of ACI 318-11 were compared with these
tests and the results were unconservative. The reduction factor for
the strength of the unreinforced struts should be reduced to βs = 0.42 instead of 0.60 for a strut without reinforcement, such as the inclined strut transferring the load to the support for a point load near an end support.