Title:
Determining Printable Zone of Three-Dimensional-Printable Mortar Using Flow Table Tests
Author(s):
Kwangwoo Wi, Jinxiang Hong, and Kejin Wang
Publication:
Materials Journal
Volume:
118
Issue:
6
Appears on pages(s):
75-85
Keywords:
flow table test; grout; printable zone; three-dimensional (3D) printing concrete
DOI:
10.14359/51733106
Date:
11/1/2021
Abstract:
In this study, 12 mortar mixtures were designed to have different flow properties using a highly flowable, rapid-set crack repair grout (CRG) for cement replacements and different water-binder ratios (w/b). Their flowability was measured using flow table tests at 0, 40, and 60 minutes after mortar mixing, corresponding to the time spent on different three-dimensional (3D) printing stages (feeding, printer setup/pre-printing, and actual printing). Feedability of all mortar mixtures and the extrudability, buildability, and printing quality of the printable mixtures were evaluated qualitatively. A printable zone was developed based on these results, and it was expressed in terms of initial (D0) and final (D25) diameters. This printable zone was then used to adjust the flow properties of a different mixture proportion containing river sand (RS). It was verified that the object printed with the mixture that met the printable zone criteria was easy to print and showed very good printing quality.