Title:
Minimum Available Deformation Capacity of Reinforced Concrete Beams
Author(s):
Catherine Wolfgram French and Arturo E/ Schultz
Publication:
Symposium Paper
Volume:
127
Issue:
Appears on pages(s):
363-420
Keywords:
beams (supports); cyclic loads; deformation; ductility; earthquakes; reinforced concrete; tests; Structural Research
DOI:
10.14359/3020
Date:
10/1/1991
Abstract:
In an effort to provide the structural design profession with an indication of the deformation capacity of reinforced concrete beams subjected to cyclic loading, results of 69 isolated reinforced concrete beam tests were assembled and interpreted. The influence of several parameters, including longitudinal reinforcement ratio, web reinforcement ratio, shear stress, shear span-to-depth ratio, axial load, floor slabs, loading rate, and loading history on deformation capacity were investigated. It was found that ductility factors in the range of two to nine reasonably may be expected from reinforced concrete beams. Of the parameters investigated, shear was identified as the single most important factor affecting deformation capacity. It was further determined that the effects of shear can be controlled most directly by limiting the demand placed on web reinforcement. To insure that beams exhibit ductility factors of at least five, it is recommended that the maximum shear force demand on web reinforcement be limited to 60 percent of its nominal capacity.