Title:
Comparison of Methods to Measure Adsorptive Capacity of Coal Fly Ash
Author(s):
G. C. Anzalone, Ivan Diaz-Loya, Rafic Y. Minkara, and Lawrence L. Sutter
Publication:
Materials Journal
Volume:
116
Issue:
4
Appears on pages(s):
107-112
Keywords:
adsorption; air-entraining admixture; air entrainment; fly ash
DOI:
10.14359/51716715
Date:
7/1/2019
Abstract:
Although there are many benefits associated with the use of coal fly ash in portland cement concrete, a common issue is the adsorption of air-entraining admixtures by residual carbon, which adversely affects the process of air entrainment. Currently, loss on ignition (LOI) is employed to estimate the total amount of carbon present. The LOI test does not measure the adsorption properties of the carbon, which is the important characteristic. The carbon present in fly ash may or may not be activated and the degree of activation can vary. Therefore, two ashes with the same LOI can have very different adsorption capacities. This paper presents a comparison of methods that have been developed to measure the adsorption capacity of a coal fly ash. These include the iodine number, direct adsorption isotherm, and a fluorescence-based method (FBM). The results of these methods are compared and the relative merits of each methodology are discussed.
Related References:
1. Pelekani, C., and Snoeyink, V. L., “Competitive Adsorption between Atrazine and Methylene Blue on Activated Carbon: The Importance of Pore Size Distribution,” Carbon, V. 38, No. 10, 2000, pp. 1423-1436. doi: 10.1016/S0008-6223(99)00261-4
2. Sutter, L. L.; Hooton, R. D.; and Schlorholtz, S., “Methods for Evaluating Fly Ash for Use in Highway Concrete,” National Cooperative Highway Research Program Report 749, Transportation Research Board of the National Academies, Washington, DC, Sept. 2013, 78 pp.
3. Mohebbi, M.; Rajabipour, F.; and Scheetz, B. E., “Reliability of Loss on Ignition (LOI) Test for Determining the Unburned Carbon Content in Fly Ash,” World of Coal Ash Conference, Nashville, TN, May 2015, pp. 5-7.
4. Watkins, M. K.; Ahmed, Z.; Sutter, L.; and Hand, D., “Characterization of Coal Fly Ash by Absolute Foam Index,” ACI Materials Journal, V. 112, No. 3, May-June 2015, pp. 393-398.
5. ASTM D4607-14, “Standard Test Method for Determination of Iodine Number of Activated Carbon,” ASTM International, West Conshohocken, PA, 2014, 5 pp. doi: 10.1520/D4607-14.10.1520/D4607-14
6. ASTM D1510-17, “Standard Test Method for Carbon Black—Iodine Adsorption Number,” ASTM International, West Conshohocken, PA, 2017, 11 pp. doi: 10.1520/D1510-17.10.1520/D1510-17
7. ASTM D3860-98(2014), “Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique,” ASTM International, West Conshohocken, PA, 2014, 4 pp. doi: 10.1520/D3860-98R14.10.1520/D3860-98R14
8. Lillo-Ródenas, M. A.; Cazorla-Amorós, D.; and Linares-Solano, A., “Behaviour of Activated Carbons with Different Pore Size Distributions and Surface Oxygen Groups for Benzene and Toluene Adsorption at Low Concentrations,” Carbon, V. 43, No. 8, 2005, pp. 1758-1767. doi: 10.1016/j.carbon.2005.02.023
9. Montgomery, J. M., and Engineers, C., Water Treatment Principles and Design, Wiley, New York, 1985.