Table of Contents
PREFACE
SP-289.01
Advances in Geological
CO2 Sequestration and Co-Sequestration with O2
by Circe A. Verba, William K. O’Connor, and Jason H. Ideker
SP-289.02
Self-Compacting High-Performance Concretes
by Mario Collepardi, Roberto Troli, and Stefano Maringoni
SP-289.03
Dynamic Performance of Eco-Friendly Prestressed Concrete Sleeper
by Tae-Hoon Koh, Young-Hoon Bae, Seon-Keun Hwang, and Myung Sagong
SP-289.04
Parameters Influencing the Performance of Shrinkage-Compensating Concrete
by Cataldo Matteo Corcella, Cristiano Cereda, Salvatore Tavano, Fulvio Canonico, and Daniela Gastaldi
SP-289.05
Bond Behavior between NSM FRP Rods and Concrete: Experimental and Numerical Investigation
by Aniello Palmieri, Stijn Matthys, and Luc Taerwe
SP-289.06
Performance of Structures Made with Synthetic Structural Fiber-Reinforced Concrete
by V. Ramakrishnan
SP-289.07
Development and Use of New Generation Grinding Aids to Reduce
CO2 Emissions and Optimize the Clinker Factor
by Joseph J. Assaad and Salim E. Asseily
SP-289.08
Design of Appropriately Constructed Facilities to Cope with Global Warming
by theodore W. Bremner
SP-289.09
Aggregates from Residual Concrete
by Giorgio Ferrari, Alberto Brocchi, Fiorenza Cella, Maria Chiara Dalconi, and Federico Longhi
SP-289.10
Effect of Steel Fiber Tensile Strength on Mechanical Properties of Steel Fiber Reinforced Concretes
by Fuat Köksal, Yusa Sahin, and Murat Sahin
SP-289.11
Fiber Reinforced High Performance Concrete for Special Applications
by Halina Szklorzová, Radek Holesinský, Josef Krátký, Jan Krestan, Stanislav Rolc, and Lenka Smetanová
SP-289.12
Reliability-Based Life Cycle Assessment of Green Concrete Structures
by Tonatiuh Rodriguez-Nikl, Joshua W. Christiansen, and Kelli Walters
Introduction 160
SP-289.13
Solutions to Support More Sustainable Construction Practices
by Bruce J. Christensen and Christian Huebsch
Introduction 174
SP-289.14
Conclusions from Blast Resistance Field Tests of FRC and RC Specimens
by Marek Foglar, Martin Kovar, and Alena Kohoutkova
SP-289.15
Strengthening of RC Members by Means of High Performance Concrete
by Stefano Maringoni, Alberto Meda, Serena Mostosi, and Paolo Riva
SP-289.16
Characterization of Lightweight Mortars Containing Wood Waste
by Valeria Corinaldesi and Giacomo Moriconi
SP-289.17
Strength and Durability Parameters of an Environmentally Friendly Concrete
by Ramón Corral, Susana P. Arredondo, José M. Gómez, Diana C. Gámez, José M. Mendivil, and Jorge L. Almaral
SP-289.18
the Long-Term Monitoring of Large-Scale Concrete Specimens Containing Lithium Salts to Mitigate Alkali-Silica Reaction
by Thano Drimalas, Jason H. Ideker, Anthony F. Bentivegna, Kevin J. Folliard, Benoit Fournier, and Michael D. A. Thomas
SP-289.19
Effect of Cracking on Chloride Diffusion Coefficient of Concrete
by Assia Djerbi Tegguer, Stephanie Bonnet, and Abdelhafid Khelidj
SP-289.20
Pozzolanic Activity of Calcined Clays
by Simone E. Schulze and Jörg Rickert
SP-289.21
Shrinkage Cracking of Self Compacting Concrete (SCC) with GGBS
by Salah Altoubat and Deena Badran
SP-289.22
Application of Packing Concepts to High Performance Self-Consolidating Mortar (SCM) Systems
by Syed Ali Rizwan, Sajjad Ahmad, and Thomas A. Bier
SP-289.23
High Performance and Conventional Concrete Properties Affected by Ashes Obtained from Different Type of Grasses
by Diana Bajare, Girts Bumanis, Genadij Shakhmenko, and Janis Justs
SP-289.24
Mechanical Properties of Ultra High Performance Concrete (UHPC)
by Omer Q. Aziz and Ghafur H. Ahmed
SP-289.25
Physical Chemistry and Rheology of Alkaline Solutions for Geopolymer Pastes Formulations
by Arnaud J.G. Bourlon, Jean-Baptiste d’Espinose, Eric Lécolier, and David Pasquier
SP-289.26
Calcined Marl as a Pozzolan for Sustainable Development of the Cement and Concrete Industry
by Tobias Danner, Tone Østnor, and Harald Justnes
SP-289.27
Comparison of Statistical Mix-Design Proportions of High Strength Self-Compacting Concrete
by Ozlem Akalin and Bahar Sennaroglu
SP-289.28
Effects of Limestone Quarry Dust Content on Rheology and Strength of Self-Compacting Mortar
by B. Benabed, S. Kenai, L. Azzouz, E. Kadri, and A. S. E. Belaidi
SP-289.29
Ion Filtration Effect of Superabsorbent Polymers for Internal Curing
by W. Siriwatwechakul, J. Siramanont, and W. Vichit-Vadakan
SP-289.30
Investigation of the Foamed Concrete Properties Containing Nanosilica, as Compared with the Foamed Concrete Containing Microsilica
by Alireza Fiouz and Sina Saadat
SP-289.31
Efficiency of Calcined Clay in Cementitious Systems
by Nancy Beuntner, Klaus Rapp, and Karl-Christian Thienel
SP-289.32
Use of Radioactive Reinforcement in the Construction of Concrete Bridges
by Peter Paulík, Michal Pánik, and Vladimír Necas
SP-289.33
Early Age and Durability Properties of Dredged Marine Sand Mortars
by Amor Ben Fraj, Mohamed Miraoui, Frédéric Boinski, and Pierre Mounanga
SP-289.34
SCC with Ground Bottom Ash from Municipal Solid Wastes Incinerators
by Silvia Collepardi, Mario Collepardi, Giacomo Iannis, and Alessandro Quadrio Curzio
INDEX 465
CONVERSION FACTORS 473