Table of Contents
SP-296—1
Young Jirsa’s Yen
Authors: Mete A. Sozen
SP-296—2
Pullout Strength of L-Bolt Anchors- Revisiting Design Equations
Authors: Donald F. Meinheit, Andrew E. N. Osborn, and Mark R. Krueger
SP-296—3
Performance of Beam-Column Joints in the 2010-2012 Christchurch Earthquakes
Authors: Roberto T. Leon, Weng Yuen Kam, and Stefano Pampanin
SP-296—4
Bond Studies of NSC Joints Confined with Stirrups, Steel Fibers, or FRP Sheets
Authors: Bilal S. Hamad and Hussein F. Mallat
SP-296—5
Bridging the gap between design provisions for connections using anchorage or strut- and tie models
Authors: Rolf Eligehausen, Christoph Mahrenholtz, Umut Akguzel, Stefano Pampanin
SP-296—6
Detecting Damage in Grouted Tension Elements
Authors: Sharon L. Wood
SP-296—7
Experimental Examination of ACI 318 Strut and Tie Modeling Provisions
Authors: Robin G. Tuchscherer, David B. Birrcher, and Oguzhan Bayrak
SP-296—8
Collaborative Research – A Success Story Strengthening Concrete Buildings
for Seismic Performance
Authors: Loring A. Wyllie, Jr.
SP-296—9
Structural Rehabilitation and Monitoring of a 28 Story Building
Authors: Ugur Ersoy, Tugrul Tankut, Ahmet Turer, and Guney Ozcebe
SP-296—10
Seismic Rehabilitation of Lightly- Reinforced, Low-Rise Walls with SFRC Overlays
Authors: Julian Carrillo, Sergio M. Alcocer, and José A. Pincheira
SP-296—11
Lessons on Seismic Rehabilitation of Concrete Buildings Learned From Recent
Earthquakes
Authors: Shunsuke Sugano
SP-296—12
Lessons Learned from the 2011 Tohoku, Japan, Earthquake
Authors: Shunsuke Otani
SP-296—13
Cyclic Lateral Load Test and the Estimation of Elastic Drift Response of
A Full-Scale Three-Story Flat-Plate Structure
Authors: Damon R. Fick, Mete A. Sozen and Michael E. Kreger