Table of Contents
Preface
SP-303-01
Responsibility, Durability, and Construction Requirements in ACI 318-14
by Terence C. Holland
SP-303-02
Grouts for Bridge Post-tensioning Tendons at Below-Freezing Temperature
by Yang Fumin, Ma Rongtian, Zhang Yuanqing, and Zhang Yong
SP-303-03
Case Studies of CO2 Utilization in Concrete
by Sean Monkman and Mark MacDonald
SP-303-04
Effect of Steam Curing on Mechanical Properties of Self-Compacting Concrete Containing Pozzolan
by Aliakbar Ramezanianpour, SeyedAli Ghahari, AmirMohammad Ramezaninapour, and Khashayar Esmaeili
SP-303-05
Performance of Sulpho-Based Rapid-Hardening Concrete
by Sergio Tortelli and Maurizio Marchi
SP-303-06
Rapid Strength Concrete for Extending Service Life of Transportation Infrastructure
by Boris Stein, Robert Ryan, Vincent Perez, and Tanmay Kumar
SP-303-07
Flexural Crack Width of Reinforced Concrete Beams with Roof Tile Waste Aggregate
by Mwangi Martin Macharia, Yuko Ogawa, Katsumi Yamaguchi, Kenji Kawai, and Ryoichi Sato
SP-303-08
Processing of Sugar Cane Bagasse for Making it Pozzolanic
by Rein Terje Thorstensen
SP-303-09
Phase Compositions and Strengths of One-Year-Old Ternary Cement Composites
by L’udovít Krajci, Ivan Janotka, Michal Bacuvcík, and Subhash C. Mojumdar
SP-303-10
Influence of Coal Mining By-Products on the New Blended Cement Properties
by Moisés Frías, Olga Rodríguez, Rosario García, Raquel Vigil, Iñigo Vegas, Sagrario Martínez-Ramírez, Lucía Férnandez-Carrasco, and Ma Isabel Sánchez de Rojas
SP-303-11
Characterization of Concrete with Recycled Aggregates Produced from Returned Concrete
by Giorgio Ferrari, Alberto Brocchi, Luca Torelli, Gilberto Artioli, Michele Secco Luca Valentini, and Maria Chiara Dalconi
SP-303-12
The Influence of a New Metal Silicate Hydrate Admixture on Concrete Strength and Durability
by Giorgio Ferrari, Vincenzo Russo, Davide Salvioni, Francesco Surico, Gilberto Artioli, Maria Chiara Dalconi, Michele Secco, and Luca Valentini
SP-303-13
Shotcrete Test Center
by by Espen A Rudberg and Thomas Beck
SP-303-14
Designing Alternative Binders Utilizing Synergistic Reactions
by Harald Justnes and Tone Anita Østnor
SP-303-15
Effect of Supplementary Cementitious Materials on the Rheology of Blended Cements
by Ashok. K. Tiwari, Maulik. M. Panseriya, Prakash C. Mathur, and Subrato Chowdhury
SP-303-16
Durability and Dimensional Stability of Concrete Containing Zinc Slag as Sand
by Bhavna Tripathi, Tarush Chandra, and Sandeep Chaudhary
SP-303-17
Hydration Properties and Technical Behavior of Calcium Sulfoaluminate Cements
by Antonio Telesca, Milena Marroccoli, Michele Tomasulo, and Gian Lorenzo Valenti
SP-303-18
Microspheres-Based Admixture for Free-Thaw Durability of Concrete
by Frank Shaode Ong, Charles K. Nmai, James Curtis Smith, and John Luciano
SP-303-19
Adoption of Resistivity Tests for Concrete Acceptance
by Robert Douglas Hooton and Gita Charmchi
SP-303-20
Compatibility of Superplasticisers in Concrete with Mixed Recycled Aggregate
by C. Medina, W. Zhu, E.Asensio, I.F. Saéz del Bosque, M. Frías, and M. I. Sánchez de Rojas
SP-303-21
Research on Using Fluorosilicate for the Enhanced Performance of Concrete
by Wei Li, Yi Wang, Gao-ming Wang, Yu Shi, and Zi-ming Wang
SP-303-22
An Overview of ACI Report on High-Volume Fly Ash Concrete
by Harvey H. Haynes
SP-303-23
Reinforcement of Hollow Concrete Beams with FRP Bars Made from Recycled Materials
by Robert J. Thomas and Sulapha Peethamparan
SP-303-24
Properties of Steam-Cured Fly Ash Concrete Using Porous Ceramic Waste Aggregate
by Phuong Trinh Bui, Yuko Ogawa, Naoki Doi, Kenji Kawai, and Ryoichi Sato
SP-303-25
Evaluation and Modification of fib Service Life Design Model for Persian Gulf Region
by Aliakbar Ramezanianpour, Ehsan Jahangiri, Babak Ahmadi, and Faramarz Moodi
SP-303-26
Aggregate Reactivity and the Efficiency of Supplementary Cementing Materials
by Jens Kronemann and Klaus-Juergen Huenger
Index