Description

Sponsored by: ACI, RILEM, Université de Sherbrooke, Université Toulouse III, CRIB, LMDC Toulouse

In July of 1983, the Canada Centre for Mineral and Energy Technology of Natural Resources Canada (CANMET), in association with the American Concrete Institute (ACI) and the U.S. Army Corps of Engineers, sponsored a 5-day international conference in Montebello, Quebec, Canada, on the use of fly ash, silica fume, slag, and other mineral by-products in concrete. The conference brought together representatives from industry, academia, and government agencies to present the latest information on these materials and to explore new areas of needed research. Since then, eight other such conferences have been held around the world (Madrid, Trondheim, Istanbul, Milwaukee, Bangkok, Madras, Las Vegas, and Warsaw). The 2007 Warsaw Conference was the last in this series.

In 2017, due to the renewed interest in alternative and sustainable binders and supplementary cementitious materials, a new series was launched by Sherbrooke University (Professor Arezki Tagnit-Hamou), American Concrete Institute (ACI), and the International Union of Laboratories and Experts in Construction Materials, Systems and Structures (RILEM)—in association with a number of other organizations in Canada, the United States, and the Caribbean—sponsored the 10th ACI/RILEM International Conference on Cementitious Materials and Alternative Binders for Sustainable Concrete (ICCM2017). The conference was held October 2-4, 2017, in Montréal, Canada. The conference proceedings, containing 50 reviewed papers from more than 33 countries, were published as ACI SP-320.

In 2021, UdeS, ACI, and RILEM, in association with Université de Toulouse and a number of other organizations in Canada, the United States, and Europe, sponsored the 11th ACI/RILEM International Conference on Cementitious Materials and Alternative Binders for Sustainable Concrete (ICCM2021). The conference was scheduled to take place in Toulouse, but due to COVID, it was held online June 7-10, 2021. The conference proceedings, containing 53 reviewed papers from more than 21 countries, were published as ACI SP-349.

In 2024, the conference was finally held in-person in Toulouse from June 23 to 26, 2024, with the support of UdeS, ACI, and RILEM in association with Université de Toulouse (Martin Cyr) and a number of other organizations in Canada, the United States, and Europe. The purpose of this international conference was to present the latest scientific and technical information in the field of supplementary cementitious materials and novel binders for use in concrete. The new aspect of this conference is to highlight advances in the field of alternative and sustainable binders and supplementary cementitious materials for the transition to low carbon concrete. The conference proceedings, containing 78 reviewed papers from more than 25 countries, have been published as ACI SP-362.

Thanks are extended to the members of the International Scientific Committee who reviewed the papers. The cooperation of the authors in accepting the reviewers’ suggestions and revising their manuscripts accordingly is greatly appreciated. The involvement of the steering committee and the organizing committee is gratefully acknowledged. Special thanks go to Chantal Brien (Université de Sherbrooke) for the administrative work associated with the conference and for processing the manuscripts for both the ACI proceedings and the supplementary volume.

Arezki Tagnit Hamou, Editor

Chairman, 12th ACI/RILEM International Conference on Cementitious Materials and Alternative Binders for Sustainable Concrete (ICCM2024).

Sherbrooke, Canada, 2024

Document Details

Publication Year: 2024

Pages: 1062

ISBN: 9781641952507

Formats: Protected PDF/Web View

Table of Contents

SP-362—1

Interface Properties Between Reactive Magnesia Cement Matrix and GFRP Reinforcing Bar

1-17

Authors: Bo Wu and Jishen Qiu

SP-362—2

The Influence of TiO2 Nanoparticles on the Smart Properties of Alkali-Activated Materials

18-37

Authors: Denny Coffetti, Elena Crotti, Simone Rapelli, and Luigi Coppola

SP-362—3

Experimental Study on a Low-Carbon Pervious Concrete Based on Alkali-Activated Binder and Recycled Aggregates

38-48

Authors: Denny Coffetti, Simone Rapelli, and Luigi Coppola

SP-362—4

Multiscale Mechanical Investigation of Ternary Binders Incorporating Calcined Clay and Slag

49-63

Authors: Imane Bekrine, Benoît Hilloulin, and Ahmed Loukili

SP-362—5

Effect of Supplementary Cementitious Materials (SCMS) on the Structural Build-Up of Cement Pastes

64-80

Authors: Youssef El Bitouri and Eric Garcia-Diaz

SP-362—6

Structural Geopolymer Mortars with Maximum Amounts of Construction and Demolition Wastes

81-96

Authors: Gultekin Ozan Ucal, Hocine Siad, Mohamed Lachemi, Obaid Mahmoodi, and Mustafa Sahmaran

SP-362—7

It’s Not Rocket Science – Multiple SCM Blends Give High Durability AND Low Carbon

97-107

Author: Robert Lewis

SP-362—8

Rheology of Stabilized Earth-Based Paste

108-126

Authors: Mojtaba Kohandelnia and Ammar Yahia

SP-362—9

Improving Sulfate Resistance in Alkali-Activated Self-Compacted Concrete: Utilizing Precursor Combinations and Dry-Powder Activators as a Novel Approach for Enhanced Durability

127-146

Author: Dima Kanaan

SP-362—10

Workability of Low-Clinker Mortars with Recycled Fine Aggregates and Different Polymers as Superplasticizer

147-163

Authors: Mareike Thiedeitz, Noah Tarrab Maslaton, and Thomas Kränkel

SP-362—11

Mechanical Performance and Microstructural Investigation of Binary and Ternary Lime Binders with Silica Fume and Metakaolin

164-178

Authors: Luca Penazzato, Rogiros Illampas, Ioannis Rigopoulos, Ioannis Ioannou, and Daniel V. Oliveira

SP-362—12

Control of Physical Deterioration of Foamed Geopolymers Exposed to High Temperature

179-188

Author: Zhuguo Li

SP-362—13

Replacement of Natural Sand with Manufactured Sand While Maintaining Packing Density

189-201

Authors: Barbara Aboagye, Ryan Gosselin, and William Wilson

SP-362—14

Formulation of Self-Compacting Concrete with Limestone Tuff and Study of the Parameters Influence on the Responses

202-214

Authors: Boulkhiout M., Benna Y., Bali A., Benyoussef E.H., and Silhadi K.

SP-362—15

Evaluation of the AC Conductivity and the Percolation State in Cementitious Materials Based on Alumina Slag

215-239

Authors: José Luis Ochoa M., Stephani Voelger S., and Adrián R., Arias P.

SP-362—16

Influence of the Polymer Structure on the Rheology of Portland Cement and LC3 Pastes Containing Superplasticizers

240-248

Authors: Torben Gädt and Simon Nickl

SP-362—17

Machine Learning Models for Predicting Rheological Properties of Self-Consolidating Concrete (SCC)

249-267

Authors: Abdelhamid Hafidi, Ilhame Harbouz, Benoit Hilloulin, Ahmed Loukili, and Ammar Yahia

SP-362—18

Effects of Si/Al Molar Ratio on the Structure and Properties of Metakaolin-Based Alkali Activated Binders

268-282

Authors: Jessica Lohmann and Frank Schmidt-Döhl

SP-362—19

Hydration Mechanism of MgO-Nesquehonite Blends

283-291

Authors: Paula Montserrat-Torres, Barbara Lothenbach, and Frank Winnefeld

SP-362—20

Effect of Milling on the Reactivity of Mixed Recycled Aggregate Powder as an SCM

292-301

Authors: Jingwen Liu, Pieter Rauwoens, and Özlem Cizer

SP-362—21

Linking Water Demand and Surface Area of Calcined Palygorskite

302-312

Authors: Valentin Roux, William Wilson, Dimitri Deneele, Michael Paris, and Arezki Tagnit-Hamou

SP-362—22

Rheological Evaluation of High Filler–Low Water Ternary Slag Cement Concrete with Low Binder Intensity

313-320

Authors: Matthew Cruickshank, Erisa Myrtja, Roberta Alfani, Laurent Frouin, and Mohend Chaouche

SP-362—23

Investigating the Potential of Limestone and Calcined Clay as a Substitute for Fly Ash in Strain-Hardening Cementitious Composites (SHCC)

321-330

Authors: Ameer Hamza Ahmed, Marco Liebscher, Cesare Signorini, and Viktor Mechtcherine

SP-362—24

Performance of Calcium Nitrate as Accelerator for Cement Blended with Blast Furnace Slag

331-343

Authors: Harald Justnes, Tobias Danner, Elise Marie Rong Anfinsen, Aleksandra Marie Høye, Margrethe Munch-Ellingsen, and Mehrdad Torabzadegan

SP-362—25

Feasibility of Using Natural Pozzolan-Limestone-Based Cement Composite for 3D Printing

344-357

Authors: Haodao Li, Alfred Addai-Nimoh, and Kamal H. Khayat

SP-362—26

Solid Phase Analysis of Hydrated MgO/Nesquehonite Pastes with Silica or Metakaolin Addition

358-365

Authors: Zeyu Zhou, Ellina Bernard, and Barbara Lothenbach

SP-362—27

Remediated Thermal-Treated Soil and Tar-Containing Asphalt as Secondary Filler and Sand in Self-Compacting Concrete

366-375

Authors: Shizhe Zhang, Jeroen Lenderink, Marc Brito van Zijl, Vincent Twigt, and Rob Bleijerveld

SP-362—28

Early Age Shrinkage, Hydration Kinetics and Workability of Mortars Containing Metakaolin and Limestone Powder

376-392

Authors: Alban Metallari, Mirco Wahab, and Thomas A. Bier

SP-362—29

Direct and Delayed Dosing: A New Approach to Quantify Ineffective Superplasticizers

393-411

Authors: Shengnan Sha, Moghul Sirajuddin, and Robert J. Flatt

SP-362—30

Quantitative Analysis of Fly Ash Hydration Products Formed in Sulfate Environment

412-431

Authors: Rajaram Dhole, Michael D.A. Thomas, Kevin J. Folliard, and Thano Drimalas

SP-362—31

Assessing Fly Ash Beneficiation’s Process Effect on Concrete Performance

432-443

Authors: Rennan Medeiros and Leandro. F. M. Sanchez

SP-362—32

Utilization of Electric Arc Furnace Slag for CO₂ Storage in Mortar using Pressurized CO₂ Curing Condition

444-452

Authors: Indong Jang, Namkon Lee, Hoon Moon, Gijoon Park, Gumsung Ryu, and Jungjun Park

SP-362—33

Predicting the Microstructure Stabilization Time from Electrical Resistivity Measurements

453-460

Authors: Thomas Bernard and William Wilson

SP-362—34

Ternary Cement Mixtures and Marble and Granite Waste in Self-Compacting Concrete: An Evaluation of Fresh and Carbonation Properties

461-473

Authors: Mara M. L. Pereira, Arthur A. Palma e Silva, and Valdirene M. S. Capuzzo

SP-362—35

Combined Effect of Polycarboxylate Ether and Phosphonated Superplasticizers in Limestone Calcined Clay Cement

474-486

Authors: Sirajuddin Moghul, Sruthi Sreeram, Shengnan Sha, Franco Zunino, and Robert J. Flatt

SP-362—36

Hardening and Shrinkage Kinetics of Geopolymers

487-498

Authors: Hugo Thuilliez, Christophe Lanos, Annabelle Phelipot-Mardelé, and Gérard Mauvoisin

SP-362—37

A Novel Clinker-Free Binary Paste with Biomass Fly Ash and Slag

499-506

Authors: Xuhui Liang and Guang Ye

SP-362—38

Valorization of Harbour Dredging Sediments as Supplementary Cementitious Materials

507-519

Authors: Manassée Foksou Tchilia, Victor Brial, and Claudiane Ouellet-Plamondon

SP-362—39

Hydration Properties and Physical Characteristics of Belite Cements

520-534

Authors: Antonio Telesca, Milena Marroccoli, Neluta Ibris, Fulvio Canonico, and Daniela Gastaldi

SP-362—40

Particle Interaction in Metakaolin Suspensions

535-546

Authors: Sergio Real, Laura González-Panicello, Francisca Puertas, and Marta Palacios

SP-362—41

On the Formation of Al/Fe-AFm Solid Solutions During Hydration of Fe-Rich Binders

547-557

Authors: Aurore Lechevallier, Mohend Chaouche, Jérôme Soudier, and Guillaume Renaudin

SP-362—42

Upcycling Basic Oxygen Furnace (BOF) Slag into a Carbon-Negative Supplementary Cementitious Material (SCM) through Mineral Carbonation

558-569

Authors: Hadi Kazemi Kamyab, Peter Nielsen, Bert Riems, and Liesbeth Horckmans

SP-362—43

Low-Carbon Concrete Achieved through Rheology Modification

570-584

Authors: Lesley Ko, Jeffery Bury, and Charles Nmai

SP-362—44

Development Of Bauxite Residue and Class F Fly Ash-Based Geopolymer Concrete

585-593

Authors: Dena Shalaby, Émilie Garneau, Mathieu Fiset, Joao Augusto Lago Araujo Seixas, and Ahmed Rahem

SP-362—45

Leaching of Magnesium Phosphate Cement Pastes: Influence of the Mg/P Molar Ratio

594-609

Authors: Laura Diaz Caselles, Ganaël Bon, Céline Cau Dit Coumes, Pascal Antonucci, Angélique Rousselet, Adel Mesbah, and Valérie Montouillout

SP-362—46

Rheology and Early-Age Reactivity of Calcined Kaolinite

610-614

Authors: Yannick Demeusy, Sandrine Gauffinet, and Christophe Labbez

SP-362—47

Effect of Carbonation on Mechanical Properties and Microstructure of One-Part Geopolymer Based on Thermo-Mechanical-Synthesis Sediments Fly Ash Mix

615-629

Authors: Elie Mahfoud, Khadim Ndiaye, Walid Maherzi, Salima Aggoun, Nor-Edine Abriak, and Mahfoud Benzerzour

SP-362—48

Influence of Calcination Temperature on the Properties of Clay

630-638

Authors: Mehnaz Dhar and Shashank Bishnoi

SP-362—49

Marine Dredged Sediments as a Partial Alternative to Sand in Cementitious Systems using Particle Packing Optimization

639-650

Authors: Parisa Heidari, William Wilson, and Patrice Rivard

SP-362—50

High Initial Strength Low Clinker Ternary Binders for Walls with Integrated Formwork

651-670

Authors: Lucas Mosser, Eric Garcia Diaz, Patrick Rougeau, and François Jacquemot

SP-362—51

Clay Calcination Methods and Composition Impacts on Calcined Clay Properties

671-681

Authors: Anastasia Koutsouradi, Anne J. Damø, Wilson R. Leal da Silva, Mehnaz Dhar, and Peter A. Jensen

SP-362—52

Use of High SO3 Coal Ash as Supplementary Cementitious Materials in Concrete

682-700

Authors: Gopakumar Kaladharan, Moe (Mohammadreza) Sharbaf, and Farshad Rajabipour

SP-362—53

Experimental-Numerical Studies of Moisture-Toluene Buffering Capacity of HLC

701-719

Authors: Anh Dung Tran Le, Jianshun S Zhang, Zhenlei Liu, Fathia Dahir Igue, Bing Beverly Guo, Jérôme Lasne, Marie Verriele, and Frédéric Thevenet

SP-362—54

Early Reactivity Assessment of Calcined Clays and the Impact of Secondary Phases

720-732

Authors: Tafadzwa Ronald Muzenda, Fabien Georget, and Thomas Matschei

SP-362—55

Insights into Phase Assemblage in MgO-Al2O3-(SiO2)-CO2 Systems

733-737

Authors: H. Nguyen, E. Bernard, and P. Kinnunen

SP-362—56

Enhancing Reactivity of Calcined Clays for Sustainable Cement Production through Optimization of Rotary Kiln Parameters

738-762

Authors: Abdelmoujib Bahhou, Yassine Taha, Yasmine Rhaouti, Mohamed El Amal, Rachid Hakkou, Mostafa Benzaazoua, and Arezki Tagnit-Hamou

SP-362—57

Chloride Diffusion in Geopolymers Containing Phase Change Materials

763-773

Authors: Bouha El Moustapha, Stéphanie Bonnet, and Abdelhafid Khelidj

SP-362—58

Durability of Concretes with Low Environmental Emissions Based on Ternary Binders: Corrosion Resistance and Positioning with Respect to the Performance Approach

774-782

Authors: Thomas Pernin, Suzanne Le Thierry, Jonathan Mai-Nhu, François Jacquemot, Lucas Mosser, and Patrick Rougeau

SP-362—59

Assessing Pozzolanic Reactivity of Reclaimed Fired Clay Roof Tiles and Bricks in Presence of Ground Limestone

783-793

Authors: Bernadin Guillaume, Théodore Serbource, Sandrine Gauffinet, Marie-Noëlle de Noirfontaine, and Laurent Izoret

SP-362—60

Impact of the Type of Binder on the Properties of Deep Soil Mixing Materials

794-812

Authors: Clément Bideux, Javad Eslami, Anne-Lise Beaucour, Albert Noumowe, Fabrice Mathieu, and Philippe Gotteland

SP-362—61

Effect of Sorghum Shives & Wheat Straw on the Properties of Compressed Earth Blocks

813-827

Authors: Imane Gharbage, Ferhat Benmahiddine, and Nassim Sebaibi

SP-362—62

Investigations of Ettringite Morphology with the Use of Different Retarders in CSA/OPC Blends

828-840

Authors: Tristana Duvallet, Robert Rathbone, Robert Jewell, and Christopher Moore

SP-362—63

Valorization of Primary Aluminum Industry By-Product in Cement Materials

841-853

Authors: Victor Brial, Laurent Birry, and Claudiane Ouellet-Plamondon

SP-362—64

Utilization of Waste CO2 Generated Vaterite in Blended Cements

854-870

Authors: Ying Wang, Jesus Gonzalez, and Craig W. Hargis

SP-362—65

Study on Use of MSWI Fly Ash with Mainstream Supplementary Cementitious Materials

871-886

Authors: Kwangwoo Wi, Oguzhan Sahin, Kejin Wang, and Yunsu Lee

SP-362—66

Resistance to Chloride Ingress of Eco-Efficient Concrete Proportioned through Particle Packing Models (PPMs)

887-900

Authors: M.T. de Grazia, L.F.M. Sanchez, and A. Leemann

SP-362—67

Enhancing the Journey Towards Concrete Net Zero: The Role of Eco-Efficient Concrete, Particle Packing Models, and Limestone Fillers

901-915

Authors: M.T. de Grazia and L.F.M. Sanchez

SP-362—68

Efficiency of Using Recycled Coarse Aggregate for Internal Curing of Blended Cement Concretes

916-929

Authors: Troian Viacheslav, Gots Volodymyr, Bruno Alex, Panek Rafał, and Flatt Robert J.

SP-362—69

Comparative Study of the Mechanical and Durability Performance of Low Carbon Concrete Matrices with Alternative SCMS

930-940

Authors: Eliana Soldado, Hugo Costa, Ricardo do Carmo, and Eduardo Júlio

SP-362—70

Harvested Fly Ash for Supplementary Cementitious Materials

941-952

Authors: Nader Ghafoori, Ariful Hasnat, and Aderemi Gbadamosi

SP-362—71

Investigation of the CO₂ Sequestration by Accelerated Carbonation as a Function of the Composition, Origin, Production Process, and Age of Recycled Concrete Aggregates

953-965

Authors: Sandrine Braymand and Sébastien Roux

SP-362—72

Metals in Mine Tailings and Prospects for Use in Cementitious Materials

966-975

Authors: Anne Mette Tholstrup Bagger, Stefanie Lode, Wolfgang Kunther, and Pernille Erland Jensen

SP-362—73

Effect of Superplasticizer on Water Availability and Rheological Properties of Cement Paste Containing Calcined Clay

976-985

Authors: L. Ferrari, V. Bortolotti, N. Mikanovic, M. Ben-Haha, and E. Franzoni

SP-362—74

Mechanical Behavior of Concrete Based on Aquaculture Co-Products

986-997

Authors: Camille Martin--Cavaillé, Alexandra Bourdot, Olivier Rateau, Malo L’helguen, Nassim Sebaibi, and Rachid Bennacer

SP-362—75

Data Mining Heidelbergmaterials Database: Portland Cement – Limestone Systems Optimization with Machine Learning

998-1005

Authors: Alexandre Ouzia and Mohsen Ben Haha

SP-362—76

Chemical Reactivity Assessment of Glass Powder in R³ Method Synthetic Concrete Pore Solution by Accelerated Solubility Testing

1006-1019

Authors: Wena de Nazaré do Rosario Martel, Josée Duchesne, and Benoît Fournier

SP-362—77

Effect of Biochar on the Microstructure and Mechanical Response of Cement Paste

1020-1032

Authors: Renata Lorenzoni, Alexander Mezhov, Tobias Fritsch, Wolfram Schmidt, and Sabine Kruschwitz

SP-362—78

Mechanical Properties and Freezing and Thawing Behavior of 3D Printing Concrete Containing Recycled Fine Aggregates from Construction and Demolition Waste

1033-1051

Authors: Yeakleang Muy, Luc Courard, Xavier Garnavault, David Bulteel, Sébastien Rémond, Maria Taleb, and Julien Hubert

ERRATA INFO

Any applicable errata are included with individual documents at the time of purchase. Errata are not included for collections or sets of documents such as the ACI Collection. For a listing of and access to all product errata, visit the Errata page.

Return/Exchange Policy

Printed / Hard Copy Products: The full and complete returned product will be accepted if returned within 60 days of receipt and in salable condition. A 20% service charge applies. Return shipping fees are the customer’s responsibility.

Electronic /Downloaded Products & Online Learning Courses: These items are not eligible for return.

Subscriptions These items are not eligible for return.

Exchanges: Contact ACI’s Customer Services Department for options (+1.248.848.3800 – ACICustomerService@concrete.org).