Table of Contents
Chapter 1—Repair material description
1.1—Recommended use
1.2—Claimed benefits
1.3—Stated limitations
Chapter 2—Definitions
Chapter 3—Composition
3.1—Total sulfur trioxide (SO3) (ASTM C114)
3.2—Total alkali content (ASTM C114)
3.3—Chloride content
3.4—pH
3.5—Characteristics of aggregate (ASTM C33/C33M)
Chapter 4—Physical properties
4.1—Material unit weight
4.2—Time of setting
4.3—Air content
4.4—Yield
Chapter 5—Hardened properties
5.1—Density, absorption, and voids (ASTM C642)
5.2—Curing
5.3—Compressive strength
5.4—Flexural strength
5.5—Splitting tensile strength (ASTM C496/C496M)
5.6—Direct tensile strength (CRD-C 164)
5.7—Modulus of elasticity (ASTM C469)
5.8—Short-term bond (ICRI Guideline No. 210.3 performed at 1, 7, and 28 days of age)
5.9—Length change (ASTM C157/C157M)
5.10—Coefficient of thermal expansion (CRD-C 39)
5.11—Freezing-and-thawing resistance (ASTM C666/C666M, Procedure A)
5.12—Scaling resistance (modified ASTM C672/C672M)
5.13—Compressive creep (ASTM C512)
5.14—Rapid chloride permeability (ASTM C1202)
5.15—Chloride ponding (ASTM C1543)
5.16—Sulfate resistance (ASTM C1012)
5.17—Chemical resistance (ASTM D1308)
5.18—Cracking resistance (ASTM C1581 ring test)
Chapter 6—Packaging and storage
6.1—Packaging ASTM C928/C928M, C1107/C1107M, or both
6.2—Volume yield calculated from mass per unit volume of material
6.3—Shelf life
6.4—Storage requirements
6.5—How to use the material
Chapter 7—Safety
Chapter 8—References
8.1—Referenced standards and reports
8.2—Cited references