Table of Contents
CHAPTER 1—INTRODUCTION AND SCOPE, p. 2
1.1—Introduction, p. 2
1.2—Scope, p. 2
CHAPTER 2—DEFINITIONS, p. 3
CHAPTER 3—REPAIR MATERIAL DESCRIPTION, p. 4
CHAPTER 4—PACKAGED DRY MATERIAL CONTENT CHARACTERISTICS, p. 5
4.1—Total sulfur trioxide (SO3), p. 5
4.2—Total alkali content, p. 5
4.3—Chloride content, p. 6
4.4—pH, p. 6
4.5—Characteristics of aggregate, p. 6
CHAPTER 5—FRESH STATE CHARACTERISTICS AND PROPERTIES, p. 8
5.1—Consistency, p. 8
5.2—Material unit weight, p. 8
5.3—Time of setting, p. 8
5.4—Air content, p. 8
5.5—Yield, p. 9
CHAPTER 6—HARDENED STATE CHARACTERISTICS AND PROPERTIES, p. 10
6.1—Curing of specimens used in characterization tests, p. 10
6.2—Density, absorption, and voids, p. 10
6.3—Air content, p. 11
6.4—Compressive strength, p. 11
6.5—Splitting tensile strength, p. 11
6.6—Flexural strength, p. 12
6.7—Direct tensile strength, p. 12
6.8—Short-term tensile bond, p. 13
6.9—Modulus of elasticity, p. 13
6.10—Compressive creep, p. 14
6.11—Coefficient of thermal expansion, p. 15
6.12—Length change, p. 15
6.13—Restrained expansion, p. 16
6.14—Cracking resistance, p. 16
6.15—Resistance to freezing and thawing, p. 17
6.16—Scaling resistance, p. 17
6.17—Electrical indication of concrete’s ability to resist chloride ion penetration, p. 18
6.18—Chloride ponding, p. 19
6.19—Bulk electrical resistivity or conductivity, p. 20
6.20—Sulfate resistance, p. 20
6.21—Chemical resistance, p. 20
CHAPTER 7—PACKAGING INFORMATION AND CONTENT, p. 22
7.1—Packaging information, p. 22
7.2—Package mass and condition, p. 22
CHAPTER 8—HOW TO USE THE MATERIAL, p. 23
8.1—Concrete substrate preparation, p. 23
8.2—Bonding agent, p. 23
8.3—Aggregate extension, p. 23
8.4—Mixing, p. 23
8.5—Volume yield calculated from mass per unit volume of material, p. 23
8.6—Application and finish, p. 23
8.7—Curing, p. 24
8.8—Cleanup, p. 24
8.9—Safety, p. 24
8.7C—Curing, p. 24
CHAPTER 9—REFERENCES, p. 25
Authored documents, p. 26