Title:
Sliding in Compression Zones of Reinforced Concrete Shear Walls: Behavior and Modeling
Author(s):
Burkhart Trost, Harald Schuler, and Božidar Stojadinovic
Publication:
Structural Journal
Volume:
116
Issue:
5
Appears on pages(s):
3-16
Keywords:
aggregate interlock; compression zone; flexure-shear-sliding interaction; reinforced concrete walls; sliding
DOI:
10.14359/51716755
Date:
9/1/2019
Abstract:
A new sliding model is developed to predict the shear stress-sliding deformation relationship in the compression zone of a reinforced concrete shear wall. The model considers the reinforcement ratio, the reinforcement bar diameter, the concrete mixture, and the flexure-induced crack width to calculate the shear stress transfer across a crack. The results of the model match the responses of 13 compact sliding tests, which represent the compression zone of a concrete shear wall. The specimens were initially precracked and loaded in a bidirectional test setup up to sliding displacements of 50 mm (1.97 in.). The results show that the size of a flexure-induced crack has a major impact on the sliding behavior. The sliding resistance depends primarily on the aggregate interlock effect and its
damage. Remarkably, the amount of reinforcement crossing the crack does not affect the peak sliding resistance significantly, but it affects the sliding shear stress-deformation behavior, as observed in the experiments.