Title:
On Peridynamic Computational Simulation of Concrete Structures
Author(s):
W.H. Gerstle, N. Sau, and N. Sakhavand
Publication:
Symposium Paper
Volume:
265
Issue:
Appears on pages(s):
245-264
Keywords:
fracture; peridynamic; simulation; structure.
DOI:
10.14359/51663298
Date:
10/1/2009
Abstract:
Computational simulation of reinforced concrete structures is challenging
because concrete cracks at an early stage. Also, as a composite material with steel reinforcement, it is unclear whether the reinforcement should be modeled explicitly or whether the steel-concrete composite should be considered as a single, homogeneous, material. Adding to the difficulty is the fact that concrete is a quasi-brittle material, with a gradually softening cohesive process zone. Over the past 40 years, many finite element approaches have been employed to model reinforced concretestructures. The three main approaches are the smeared crack approach (or continuum damage mechanics), the discrete crack approach (including linear elastic fracture mechanics and cohesive crack models), and the discrete element approach (including lattice and particle models). These three approaches have achieved varying degrees
of success. In 1998, Silling published a report describing the peridynamic model. This model requires no assumption regarding continuity of deformation. Using the peridynamic model, both continuous deformation behavior and fracture behavior can emerge. This paper, for the first time in an American Concrete Institute publication, presents an overview of the peridynamic literature and describes and discusses the application of peridynamics to reinforced concrete structures.