Title:
Effects on Crack Measurement Caused by Steel Reinforcing Bars
Author(s):
Yiching Lin and Tzonghow Liou
Publication:
Symposium Paper
Volume:
172
Issue:
Appears on pages(s):
209-224
Keywords:
Concretes; cracking (fracturing); reinforcing steels; tests; stresses
DOI:
10.14359/6134
Date:
12/1/1999
Abstract:
The objectives of the studies presented in this paper were to investigate the effects caused by steel reinforcing bars on determining the depth of cracks which appear on the surface of a concrete structure. Numerical studies were performed to investigate the interaction of stress waves with reinforcing bars. A full scale reinforced concrete beam was constructed as an experimental specimen. The specimen was loaded until cracks occurred. To measure the depth of a crack penetrating into the specimens, two receivers were used and located on the opposite sides of the crack. The first receiver on the impact side is used to obtain the time of impact initiation. The second receiver located on the other side of the crack is used to trace the arrival of the P-wave diffracted from the bottom edge of the crack. Subsequently, the depth of the crack can be determined. Experimental results show that if tests are performed on the regions without reinforcing bars, the crack depth can be obtained easily because the second receiver initially responds to the arrival of the diffracted P-wave. In the presence of reinforcing bars, the initial disturbance at the second receiver is caused by the arrival of P-wave propagating through reinforcing bars but its amplitude is much smaller than that associated with the following arrival of the P-wave diffracted from the bottom edge of the crack. It is concluded that the presence of reinforcing bars does not make it difficult to measure the crack depth.