Table of Contents
Chapter 1: Introduction
1.1 Introduction
1.2 Definition
1.3 History
1.4 Advantages
1.5 Disadvantages
1.6 Scope of report
Chapter 2: Design
2.1 General
2.2 Analysis
2.3 Loads
2.4 Design bending moment
2.5 Bending stiffness
2.6 Examples
2.7 Special design considerations
2.8 Building stiffness
2.9 Tolerances
2.10 Connections
2.11 Sandwich panels
2.14 Lifting analysis
2.15 Temporary bracing
2.16 Architectural/engineering documents
2.17 Reinforcement
2.18 Architectural considerations
Chapter 3: Construction Planning
3.1 Introduction
3.2 Site access and jobsite conditions
3.3 Coordination
3.4 Sequence of construction
3.5 Work platform
3.6 Curing compounds and bondbreakers
3.7 Lifting accessories
3.8 Shop drawings
3.9 Panel casting locations
3.10 Erection subcontractor
3.11 Final closure panel
Chapter 4: Construction
4.1 Introduction
4.2 Site, subgrade, and slab
4.3 Construction practices and workmanship
4.4 Shop drawings
4.5 Materials and equipment
4.6 Supervision
4.7 Casting
4.8 Strip and clean panels
4.9 Seating on foundations
4.10 Backfill
4.11 Wall panel joints
4.12 Safety
4.13 Construction checklist
Chapter 5: Erection
5.1 General Prior to construction
5.2 Prior to erection day
5.3 Safety meeting
5.4 During lift
5.5 Plumbing panels
5.6 Bracing
5.7 Closure panel
Chapter 6: Finishes-(Includes Exposed Aggregate Finish)
6.1 Introduction
6.2 Finish face up
6.3 Finish face down
6.4 Concrete materials
6.5 Method and types of finish
6.6 Cleaning
6.7 Coatings
6.8 Cracking
Chapter 7: References
7.1 Specified and/or recommended references
7.2 Cited references