Table of Contents
SP-212—1: Service Life Demonstration Based on
Simulated Exposure and Numerical Modelling
by N. R. Buenfeld
SP-212—2: Low-Heat Development in Flowing Concretes for Massive Structures
by A. Borsoi, S. Collepardi, R. Troli, and M. Collepardi
SP-212—3: Several Factors Regarding Sustainability of Marine Concrete Structures
by T. U. Mohammed, H. Hamada, and N. Otsuki
SP-212—4: Long-Term Durability of Surface Protection Systems
by M. Raupach and L. Wolff
SP-212—5: Physical, Chemical and Mechanical Analysis of a Reinforced Concrete Beam Corroded in Chloride Environment
by T. Vidal, A. Castel, and R. François
SP-212—6: Method to Quantify the Thickness of Coating Mortars
as Concrete Cover for Reinforcement
by P. Alaejos and A. Leiro
SP-212—7: Textile Reinforced Concrete (TRC)—Durability Aspects of Fine Grained Binder Systems
by W. Brameshuber and T. Brockmann
SP-212—8: Improving the Durability of Accelerated Cured Precast Concrete
with Simultaneous Curing and Protective Coating
by M. Brugger
SP-212—9: Sacrificial Cathodic Protection of RC-Structures Using a
Zinc-Hydrogel Anode—Investigations on the Effectiveness
by M. Raupach and M. Bruns
SP-212—10: Twenty Years of In-Situ Exposure to Extremely Aggressive Environment of 36 Edge Beams Cast Using Silica Fume, Fly Ash and Polypropylene Fibres
by B. Buhr, E. S. Larsen, K. Eriksen, E. Stoltzner, and P. Fidjestøl
SP-212—11: Critical Chloride Content for the Corrosion of Steel Fibres in
Artificial Concrete Pore Solutions
by M. Raupach and C. Dauberschmidt
SP-212—12: Use of Fracture Mechanics Parameters to Monitor Concrete Deterioration Due to Delayed Ettringite Formation
by L. Bergol, G. Di Pace, C. Rocco, S. Szteimberg, and L. Zitzer
SP-212—13: Design of Self Compacting Concrete for Durability Application of Prescriptive vs. Performance-Based Specifications
by G. Fornasier, C. Fava , L. Fernández Luco, and L. Zitzer
SP-212—14: An Evaluation of Methods for Measuring Heavy Metal Leaching from Concrete Structures
by K. Kawai and T. Kaya
SP-212—15: Influence of Mineral Admixtures on the Autogenous Shrinkage and Porosity of High-Strength Concrete
by M. S. Konsta-Gdoutos, J. K. Dattatreya, and S. P. Shah
SP-212—16: Quantifying Relative Performance of Protection Systems for Use in Specifying Concrete for Chloride Exposures
by M. J. McCarthy and A. Giannakou
SP-212—17: Effect of Construction Joint Preparation on Corrosion of Reinforcing Bars Under Atmospheric Environment
by T. U. Mohammed and H. Hamada
SP-212—18: Use of Hydrophobic Agents as Concrete Admixtures
by G. Moriconi and F. Tittarelli
SP-212—19: Diagnosis and Prognosis of Alkali-Aggregate Reactivity in Concrete Structures
by V. Corinaldesi and G. Moriconi
SP-212—20: Large Girders Subjected to Alkali-Silica Reaction
by S. Multon, J.-F. Seignol, and F. Toutlemonde
SP-212—21: Mechanical Properties and Durability of Concrete Pavements Containing High Volumes of Fly Ash
by T. R. Naik, R. N. Kraus, B. W. Ramme, and R. Siddique
SP-212—22: Durability of Magnesia-Phosphate Grouts in Sulfate Solutions
by J. Péra, E. Soudée, and J. Ambroise
SP-212—23: Effect of Curing on Durability of Fly Ash Concrete
by T. Özturan and M. E. Batopçu
SP-212—24: An Homogenisation Theory to Study the Aggregate Size Range Effect on ASR Swelling: Numerical Implementation and Experimental Fitting
by S. Poyet, A. Sellier, B. Capra, G. Thevenin, J. M. Torrenti, S. Prene, H. Tournier and E. Bourdarot
SP-212—25: Modelling Chloride Ingress in Concrete: A Comparative Study of Laboratory and Field Experience
by T. Callanan and M. Richardson
SP-212—26: Investigations on the Long-Term Durability of Hydrophobic Treatments on Concrete
by M. Raupach and L. Wolff
SP-212—27: Durability of SCC Concrete Structures in Switzerland
by J. Schlumpf
SP-212—28: Influence of Concentration of Ammonium Nitrate Solutions on Concrete
by U. Schneider and S.-W. Chen
SP-212—29: A Comparative Study of the Properties and Durability of Binary and Ternary Cementitious Systems
by C. Shiathas, T. Z. Muntasser, and S. O. Nwaubani
SP-212—30: Towards a Global System for Preventing Alkali-Reactivity: The Continuing Work of RILEM TC 191-ARP
by I. Sims and P. J. Nixon
SP-212—31: Effects of Early Age Curing on Durability-Related Properties of Concrete
by E. Agbasi and N. Buenfeld
SP-212—32: Factors Influencing Life Cycle Cost of RC Members
by T. Iba and H. Seki
SP-212—33: Diagnosis of a Case of Harmless Alkali-Silica Reaction in a Cracked Concrete Pavement
by L. Fernández Luco and R. J. Torrent
SP-212—34: Effects of the Moisture Condition of Concrete on Steel Corrosion
by K. Yamamoto and Y. Masuda
SP-212—35: Quantitative Evaluation of Structural Performance of Reinforced Concrete Beams Damaged by Corrosion of Reinforcing Bars
by H. Yokota, M. Iwanami, and F. Sato
SP-212—36: Mixing Effect of Different Sizes of Synthetic Fibers on Concrete
by K. Sakata, M. A. El-Wafa, and T. Ayano
SP-212—37: Corrosion Inhibitors for Reinforced Concrete: Effect of Organic Substances
by F. Bolzoni, G. Fumagalli, S. Goidanich, L. Lazzari, M. Ormellese, and M. P. Pedeferri
SP-212—38: Deterioration of Outside Walls Made with Concrete Blocks Containing Pyrite
by J. L. Gallias
SP-212—39: Relative Humidity Measured by Wooden Stick Method in Concrete Structures: Long Term Measurements and Reduction of Humidity by Surface Treatment
by V. Jensen
SP-212—40: Experimental Study of Fracture of Reinforced Steel Bar in Concrete Structures Due to Alkali-Silica Expansion
by Y. Kubo, O. Iketomi, T. Nakashima, and K. Torii
SP-212—41: Performance of Epoxy-Coated Reinforcement in Cracked Concrete in Marine Environment
by I. L. Kondratova, P. Montes, and T. W. Bremner
SP-212—42: Durability of Steel Fibre Reinforced Concrete
by A. Lambrechts, D. Nemegeer, J. Vanbrabant, and H. Stang
SP-212—43: Design Formats for Chloride Service Lifetime Based on Probabalistic Modeling and Analysis
by B. J. Leira, O. Skjølsvold, J. Lindgård, and F. Fluge
SP-212—44: Carbonation: A Probabilistic Approach to Derive Provisions for Prescriptive Requirements in Codes and Standards
by M. Maage
SP-212—45: Norwegian Experience in the Use of Pozzolans to Reduce Chloride-Ion Intrusion
by J. Lindgård, O. Skjølsvold, and K. Kjellsen
SP-212—46: Chloride Penetration Testing of Silica Fume Concretes Under Persian Gulf Conditions
by M. Ghalibafian, M. Shekarchi, A. Zare, and M. Tadaiion
SP-212—47: Durability of Porous Concrete
by M. Tamai and M. Yoshida
SP-212—48: Sulfate Resistance of Lime-Pozzolan-Cement Grouts
by E.-E. Toumbakari and D. A. Van Gemert
SP-212—49: An Integrated Approach to Identify ASR Distress in Airfield Concrete Pavements
by A. K. Mukhopadhyay, D. G. Zollinger, and S. L. Sarkar
SP-212—50: The Influence of Wick Action on Chloride Transport in Concrete
by J. M. Aldred and B. V. Rangan
SP-212—51: Natural Ageing of Different Moulding Products Used in Replacement of Stone Sculptures
by G. Fronteau, P. Bromblet, and F. Boutin
SP-212—52: Durability of Masonry Mortar
by S. Guirguis, S. J. Lawrence, and W. Samarasinghe
SP-212—53: Shrinkage Behavior of Very Dense Cement Pastes
by J. Kaufmann and T. Matschei
SP-212—54: Performance of Concrete with an Intended Working Life of 50 Years
by A. B. Ribeiro, A. Gonçalves, M. Salta, and A. Machado
SP-212—55: Some Properties of Concrete with Highly Active Rice-Husk Ash
by H. Yamamichi, F. Qingge, M. Shoya, and S. Sugita
SP-212—56: Effect of Thermal Changes on Expansion Caused by Alkali Aggregate Reaction in a Concrete Retinaing Wall
by A. Yonekura, H. Ito, K. Kuribayashi, Y. Fujita, and M. Usio
SP-212—57: Effects of Environment on Repair Materials: Results of a Five-Year Research Project
by L. Courard, A. Darimont, R. Degeimbre, and J. Wiertz
SP-212—58: Resistance to Sulfate Attack of Mixtures with Limestone-Portland Blended Cements
by M. Collepardi, S. Monosi, O. Favoni, and J. J. Ogouman Olagot
SP-212—59: Recycled Materials in Concrete Barriers
by P. A. Claisse, A. Atkinson, E. Ganjian, and M. Tyrer
SP-212—60: Mechanical Characteristics of High Performance Fibre Reinforced Concretes at Elevated Temperatures
by K. K. Sideris, P. Manita, A. Papageorgiou, and E. Chaniotakis
SP-212—61: Delayed Ettringite Formation in Concrete: Tests Based on Drying and Wetting Cycles
by A. Pavoine and L. Divet
SP-212—62: Low Cement Content Shotcrete
by F. J. Wombacher, U. Maeder, and M. Sommer
SP-212—63: Investigation of Dispersion Levels of Silica Fume in Pastes, Mortars, and Concrete
by D. Baweja, T. Cao, and L. Bucea
SP-212—64: Damage Assessment of Concrete Structures Exposed to Aggressive Marine Environment by NDT and Laboratory Techniques
by A. Moropoulou, G. Batis, A. Bakolas, M. Karoglou, and E. Aggelakopoulou
SP-212—65: The Risk of Corrosion of Steel in Recycled Aggregate Concrete
by L. Friedl, A. Volkwein, and P. Schießl
SP-212—66: Study on Performance of Concrete Using Ecocement
by S. Tanaka, T. Nakamura, S. Meiarashi, and H. Kawano
SP-212—67: Frost Resistance and Air Void System of Self-Compacting Concrete Incorporating Slag as a Fine Aggregate
by M. Shoya, M. Aba, Y. Tsukinaga, and K. Tokuhashi
SP-212—68: Laboratory Tests for Evaluation of Corrosion Inhibitor Efficiency
by L. Coppola, T. Cerulli, L. Lazzari, C. Maltese, and M. Ormellese
SP-212—69: Predicting the Microstructural Degradation of Concrete in Marine Environment
by J. Marchand, E. Samson, D. Burke, P. Tourney, N. Thaulow, and S. Sahu