Description
This Symposium Publication contains 28 papers that were presented at an International Symposium on Confined Concrete, held at Hunan University, Changsha, China, in June 2004. Topics include Performance-Based Design and Seismic Analysis, Confined Concrete Models, Finite Element Modeling, Confined Concrete in Steel and Concrete Composites, and FRP Confined Concrete.
In June of 2004, an International Symposium on Confined Concrete (ISCC-2004) was held at Hunan University, Changsha, China. The technical content of the symposium was sponsored by Joint ACI-ASCE Committee 441, Reinforced Concrete Columns. Major sponsoring agencies for ISCC-2004 included the American Concrete Institute (ACI), Pacific Earthquake Engineering Research Center (PEER), the National Natural Science Foundation of China (NSFC), the Japan Concrete Institute (JCI), and the Architectural Institute of Japan (AIJ).
The objective of the symposium was to provide an open forum for researchers around the world to exchange information and to thoroughly discuss topics related to confined concrete modeling, testing, design implementation, and related issues.
The guidance and assistance of ACI staff in finalizing the special publication are gratefully acknowledged. Particular appreciation is extended to Hunan University for hosting the symposium, and to the University of Southern California and the University of California at Davis for co-organizing the symposium.
Table of Contents
Performance-Based Design and Seismic Analysis
SP-238—1: Toward the Performance-Based Design of Confined Concrete
by S.A. Sheikh and Y. Li
SP-238—2: Seismic Performance of Confined Concrete Bridge Columns
by J.P. Moehle and D.E. Lehman
SP-238—3: Performance-Based Design of Confining Reinforcement:
Research and Seismic Design Provisions
by S. Bae and O. Bayrak
SP-238—4: Research Activities on Confined Concrete in Japan
by F. Watanabe
SP-238—5: Influence of Confinement Modeling on Cyclic Response of Reinforced Concrete Columns
by S.K. Kunnath
SP-238—6: Analytical Performance of Reinforced Concrete Columns using Various Confinement Models
by A. Esmaeily and K. Lucio
Confined Concrete Models
SP-238—7: Modeling of Stress-Strain Relationship and Deformability for Confined High-Strength Concrete
by H. Kinugasa, Y. Xiao, and A. Martirossyan
SP-238—8: Flexural Stress-Strain Curves of Confined High-Strength Concrete
(ISCC-2004)
by T.-H. Tan and N.-B. Nguyen
SP-238—9: Empirical Models for Confined Concrete under Uniaxial Loading
by B. Oh and R. Sause
SP-238—10: Accuracy and Improvements for Variable and Constant Confinement Concrete Models
by C.J. Naito and F. Cetisli
SP-238—11: Modeling the Stress-Strain Behavior of Confined Concrete Columns
by K.M. El-Dash and O.O. El-Mahdy
SP-238—12: Experimental Study on Stress-Strain Relationship of Confined
Concrete with GFRP Jackets
by C.D. Zhou and X.L. Lu
SP-238—13: Energy-Based CDM Model for Nonlinear Analysis of Confined
Concrete
by J. Li and J.-Y. Wu
Finite Element Modeling
SP-238—14: Finite Element Study of Confined Concrete
by W.-F. Chen and Y.-M. Lan
SP-238—15: Failure Criteria of Concrete under Triaxial Compression
by T.-H. Tan and X. Sun
SP-238—16: Three-Dimensional Finite Element Modeling of Confined
High-Strength Concrete Columns
by P. Bhargava, R. Bhowmick, U. Sharma, and S.K. Kaushik
Confined Concrete in Steel and Concrete Composites
SP-238—17: Confined Concrete in Concrete-Filled Steel Tubular Columns
by K. Sakino
SP-238—18: Hysteretic Behavior of Concrete-Filled Steel Tubular Columns
under Uniform Bending
by H. Nakahara and K. Sakino
SP-238—19: Seismic Retrofit for R/C Rectangular Columns by Circular
Steel Jackets
by J.H. Wang, K. Yoshimura, K. Kikuchi, and M. Kuroki
FRP Confined Concrete
SP-238—20: Behavior and Modeling of FRP-Confined Concrete: A State-of-the-Art Review
by J.G. Teng and L. Lam
SP-238—21: The Influence of Concrete Strength and Confinement Type on the Response of FRP-Confined Concrete Cylinders
by J.F. Stanton and L.M. Owen
SP-238—22: External Confinement of Low-Strength Brittle Reinforced Concrete Short Columns
by A. Ilki, O. Peker, E. Karamuk, and N. Kumbasar
SP-238—23: Experimental Study on Concrete Cylinders Confined with Various
FRP under Uniaxial Compression
by G. Wu, Z.S. Wu, Z.T. Lu, and Y.B. Ando
SP-238—24: Experimental Study of RC Columns Strengthened with CFRP Sheets Under Eccentric Compression
by W.-J. Yi, Q.-l. Xian, H.-T. Ding, and H.-y. Zhang
Other Confinement Measures
SP-238—25: Flexural Confinement of Plastic Hinges in Circular Bridge Columns
Using Unstressed Prestressing Strand as Transverse Reinforcement
by A.M. Budek, M.J.N. Priestley, and C.O. Lee
SP-238—26: Compressive and Flexural Behavior of RC Columns Laterally
Prestressed by High-Strength Steel Bars
by T. Hitaka, K. Sakino, T. Yamakawa, and A. Furukawa
SP-238—27: Experimental Investigation into Strengthening of RC Columns
using Composite Mortar Laminates Reinforced with Mesh Reinforcements
by S.P. Shang, L.M. Jiang, M.X. Zhang, and L.H. Zeng
SP-238—28: Seismic Behavior of Reinforced Concrete Frame with Split Columns
by Z.-X. Li