Table of Contents
Preface
SP-302-01
Effect of Clinker Grinding Aids on Static Yield Stress of Cement Pastes
by Joseph J. Assaad and Salim E. Asseily
SP-302-02
A 13C NMR Spectroscopic Study on the Reparation of Acid and Ester Groups in MPEG Type PCEs Prepared via Radical Copolymerization and Grafting Techniques
by Julia Pickelmann, Huiqun Li, Robert Baumann, and Johann Plank
SP-302-03
Effects of Particle Volume Fraction and Size on Polysaccharide Stabilizing Agents
by Wolfram Schmidt, Sarah Peters, and Hans-Carsten Kühne
SP-302-04
New Additive to Enhance the Slump Retention
by David Platel, Jean-Marc Suau, Clement Chosson, and Yves Matter
SP-302-05
Synthesis of a Novel Superplasticizer Prepared from Brown Coal
by Manuel Ilg and Johann Plank
SP-302-06
Influence of Superplasticizers on the Flocculation Degree of Cement Suspensions
by Lucia Ferrari and Pascal Boustingorry
SP-302-07
Influence of Temperature and Retarder on Superplasticizer Performance
by Karen Luke and Adrian Torres
SP-302-08
Properties of a New Type of Polycarboxylate Admixture for Concrete Using High Volume Blast Furnace Slag Cement
by Shinji Tamaki, Kazuhide Saito, Kazuhisa Okada, Daiki Atarashi, and Etsuo Sakai
SP-302-09
Synthesis and Properties of High Solid-Content Polycarboxylate Superplasticizer
by Yongwei Wang, Liya Wang, Yongsheng Liu, and Zepeng Chu
SP-302-10
Mastering Flow Loss in Superplasticized Cementitious Systems
by S. Mantellato, Q. Mehmeti, L. Ceni, M. Palacios, and R.J. Flatt
SP-302-11
Putting Concrete to Sleep and Waking It Up with Chemical Admixtures
by L. Reiter, M. Palacios, T. Wangler, and R.J. Flatt
SP-302-12
A Simplified Preparation Method for PCEs Involving Macroradicals
by Lei Lei and Johann Plank
SP-302-13
Impact of Slags Contained in Blended Cement on Dispersing Effectiveness of PCEs
by Ahmad Habbaba and Johann Plank
SP-302-14
Preparation and Characterization of Star-Shaped Polycarboxylate Superplasticizer
by Xiao Liu, Ziming Wang, Jie Zhu, Ming Zhao, Wei Liu, and Dongjie Yin
SP-302-15
Influence of Diester Content in Macromonomers on Performance of MPEG-Based PCEs
by Johannes Paas, Maike W. Müller, and Johann Plank
SP-302-16
Evidences about the Interactions between Grinding Aids and Cement Particles Surface
by Valerio Antonio Paternò, Sara Ottoboni, Marco Goisis, and Paolo Gronchi
SP-302-17
The Influence of C3A on the Dissolution Kinetics of Alite/Gypsum Mixtures in the Presence of PCEs
by Giorgio Ferrari, Vincenzo Russo, Massimo Dragoni, Gilberto Artioli, Maria Chiara Dalconi, Michele Secco, Leonardo Tamborrino, and Luca Valentini
SP-302-18
Preparation and Mechanism Study of Slow-Release Polycarboxylate Superplasticizers
by Jinzhi Liu, Jiaping Liu, Yong Yang, Dongliang Zhou, and Qianping Ran
SP-302-19
Effect of Pore Solution Composition on Zeta Potential and Superplasticizer Adsorption
by Dirk Lowke and Christoph Gehlen
SP-302-20
Optimization of the Structural Parameters and Properties of PCE Based on the Length of Grafted Side Chain
by Zi-Ming Wang, Zi-Chen Lu, and Xiao Liu
SP-302-21
Blended Antifreezing Admixture with Extreme Freezing-Point
by Anatoly I. Vovk
SP-302-22
Effect of Expansive Agents and Shrinkage Reducing Admixtures on the Performance of Fiber-Reinforced Mortars
by M. Collepardi, V Corinaldesi, S. Monosi, and A. Nardinocchi
SP-302-23
Interactions between Cements with Calcined Clay and Superplasticizers
by Jens Herrmann and Jörg Rickert
SP-302-24
Modification of Fresh State Properties of Portland Cement-Based Mortars by Guar Gum Derivatives
by Alexandre Govin, Marie-Claude Bartholin, and Philippe Grosseau
SP-302-25
Interaction of Polycarboxylate-based Superplasticizer/Poly(vinyl alcohol) with Bentonite and Its Application in Mortar with Clay-bearing Aggregates
by Weishan Wang, Zuiliang Deng, Zhongjun Feng, Lefeng Fu, and Baicun Zheng
SP-302-26
Effect of the Stereochemistry of Polyols on the Hydration of Cement: Influence of Aluminate and Sulfate Phases
by Camille Nalet and André Nonat
SP-302-27
A New Accelerator Approach for Improved Strength Development
by Franz Wombacher, Christian Bürge, Emmanuel Gallucci, Patrick Juilland, and Gilbert Mäder
SP-302-28
Sorption Kinetics of Superabsorbent Polymers in Cement Pastes Quantified by Neutron Radiography
by Christof Schroefl and Viktor Mechtcherine
SP-302-29
Study on the Rheology of Fly Ash Versus Calcined Marl Blended Cements with Polycarboxylate-Based Superplasticizers
by Serina Ng and Harald Justnes
SP-302-30
A Study on the Cement Compatibility of PCE Superplasticizers
by A. Lange and J. Plank
SP-302-31
Enhancing Workability Retention of Concrete Containing Natural Zeolite by Superplasticizers’ Combination
by Hessam AzariJafari, Mohammad Shekarchi, Javad Berenjian, and Babak Ahmadi
SP-302-32
Fluidity Change of Cement Paste with Superplasticizer by K2SO4 and KF
by Kazuki Matsuzawa, Daiki Atarashi, Masahiro Miyauchi, and Etsuo Sakai
SP-302-33
Cement Recycling System Using Sodium Gluconate
by Daiki Atarashi, Yutaka Aikawa, Yuya Yoda, Masahiro Miyauchi, and Etsuo Sakai
SP-302-34
The Influence of Paste Thixotropy on the Formwork-Filling Properties of Concrete
by Lucia Ferrari and Pascal Boustingorry
SP-302-35
Interaction of Montmorillonite with Poly(ethylene Glycol) and Poly(methacrylic Acid) Polymers. Consequences on the Influence of Clays on Superplasticizer Efficiency
by Rachid Ait-Akbour, Christine Taviot-Guého, Fabrice Leroux, Pascal Boustingorry, and Frédéric Leising
SP-302-36
Plasticizing Geopolymer-Type Auspensions: A Challenge
by L. Nicoleau, M. Pulkin, and T. Mitkina
SP-302-37
Admixture Concepts for the Sub-Saharan African Environment with Indigenous Raw Materials
by Wolfram Schmidt, Nsesheye S. Msinjili, Herbert C. Uzoegbo, and John K. Makunza