Description
This Specification covers epoxy multi-layer (EM) polymer overlay for bridge and parking garage decks. Type EM polymer overlay incorporates a low-modulus epoxy binder and selected aggregate to produce a flexible, skid-resistant, and low-permeability overlay. The overlay may be used for both new construction and rehabilitation of existing structures. The overlay is placed by applying the neat epoxy binder to the surface and broadcasting aggregate. This Specification includes requirements for epoxy resin, aggregates, storage and handling, surface preparation, surface profile, mixing, placement, quality control and quality assurance.
Keywords: bridge decks; epoxy; multi-layer; parking garage decks; polymer overlay; surface preparation; low permeability.
Table of Contents
SECTION 1—GENERAL
1.1—Scope
1.2—Interpretation
1.3—Definitions
1.4—Reference standards
1.5—Submittals
1.6—Project conditions
1.7—Labeling, storage, and handling of materials
1.8—Quality assurance and quality control acceptance of work
SECTION 2—PRODUCTS
2.1—Epoxy binder
2.2—Aggregate
SECTION 3—EXECUTION
3.1—Procedure qualification
3.2—Surface preparation
3.3—Mixing epoxy binder
3.4—Overlay application
3.5—Curing
3.6—Excess aggregate removal
3.7—Joints
3.8—Open to traffic
NOTES TO SPECIFIER (nonmandatory)
General notes
Foreword to checklists
MANDATORY REQUIREMENTS CHECKLIST
SUBMITTAL CHECKLIST
Return/Exchange Policy
Printed / Hard Copy Products: The full and complete returned product will be accepted if returned within 60 days of receipt and in salable condition. A 20% service charge applies. Return shipping fees are the customer’s responsibility.
Electronic /Downloaded Products & Online Learning Courses: These items are not eligible for return.
Subscriptions These items are not eligible for return.
Exchanges: Contact ACI’s Customer Services Department for options (+1.248.848.3800 – ACICustomerService@concrete.org).