Table of Contents
Curing of High-Performance Concrete for Strength-What is Sufficient?
By N.J. Carino and K.W. Meeks.
Slurries for Restoration of Historical Brickwork Buildings in Northern Germany
by K.G. Bottger and D. Knofel
Application of Fiber-Reinforced Shotcrete in Repair of Tunnel Linings in Hong Kong
by A.P.-C Sze and C.T.-W. Chan
Influence of Latex Paint Compositions on Concrete Against Chloride Penetration
by K.L. Uemoto and V. Agopyan
Experimental Study on Crack Repair by Electrochemical Method
by J.S. Ryu, No. Otsuki, and H.Y. Moon
Assessment of Diffusion Coefficient of Chloride Ions in Mortars Using Different Types of Binders
by N. Otsuki, M. Hisada, H. Minagawa, and S. Miyazato
Reproduction of Ancient Cementious Material used in China 5000 Years Ago
by K. Asaga, M. Daimon, Z.X. Li, and Y. Furusawa
Study of Electrochemical Rehabilitation of Chloride Contaminated Reinforced Concrete
by K. Ishibashi, M. Kanda, Y. Furukawa, and T. Mihara
Repair of Deteriorated Reinforced Concrete Slabs
by T. Yamamoto
Repair Methods of Chloride-Induced Corrosion of Reinforced Concrete During 10 Years' Exposure
by H. Edahiro, K. Fujii, Y. Masuda, T. Kemi, T. Inoue, and H. Jitousono
Effect of Ground Granulated Blast-Furnace Slag on Properties of Autoclaved and Combined Wet/Dry Cured Polymer-Modified Mortars.
By M. Joo, Y. Ohama, and K. Demura
Identification of Cracking Damages of Concrete Structures Using Acoustic Emission
by B.H. Oh, K.S. Kim, and E.J. Kim
Long-Term Effects of Corrosion Inhibitors for Mortar Specimens Made of Natural Sea Sand and Sea Water
by K.J. Kim, J.G. Nam, J.A. Jeoung, and D.H. Jeon
Effect of Aluminum Oxide-Isocy Anate Coating Material for Protection of Steel Reinforcement in Concrete Against Corrosion
by H.Y. Moom, S.S. Kim and H.S. Kim
Scaling Resistance of Ordinary and Very Early Strength Concrete Reinforced with Polypropylene Fibers
by K.K. Yun, J.H. Lee, C.W. Hong, and J.S. Park
Tension Stiffening Model for Steel Fiber-Reinforced Concrete Members
by C.W. Hong, K.K. Yun, B.H. Lee, and J.H. Lee
Influence of Different Curing Conditions on Strength and Durability of High-Performance Concrete
by M.F.M. Zin, Md. Safiuddin, and K.M. Yusof
Repair and Rehabilitation of Lae City Port in Papau New Guinea
by A.K. Aggarwal and L.K. Niap
Fireproof Concrete Masses for Lining in Foundry
by S. Pavlenko and I. Rekhtin
Performance Evaluation of Cement-Based Surface Coatings
by S.U. Al-Dulaijan, M. Maslehuddin, M.M. Al-Zahrani, e.A. Al-Juraifani,
S.H. Al-Idi, and M. Al-Mehthel
Substrate Absorption and it's Influence on Plastic Shrinkage of Repair Material
by K.C.G. Ong, W. Xu, and P. Paramasivam
Ferrocement in Structural Upgrading and Rehabilitation- an Overview
by P. Paramasivam, C.T.E. Lim, and K.G.G. Ong
Interactions Between Surface Coatings and Their Concrete Substrate
D.W.S. Ho and S.L. Mak
Surface Applied Corrosion Inhibitor
T.A. Burge
Application of Roller-Compacted Concrete for Rehabilitation of Dams
by T.C. Liu and J.E. McDonald
Repair of High-Strength Concrete Walls Using Low-Pressure spray-Up Techniques
by G.C. Hoff
Development of Performance Criteria for Dimensionally Compatible Cement-Based Repair Materials
by J.E. McDonald, P.H. Emmonds, A.M. Vaysburd, and D.W. Scott
Application of Lightweight Concrete with Expanded Polystyrene Granules for Concrete Slab Construction
by D. Vasovic and T. Vasovic
Influence of Steel Fibers on Cracking Behavior of Ordinary Reinforced Concrete Structures
by L. Vandewalle
Upgrading Reinforced Concrete Columns by Jacketing with Carbon Fiber-Reinforced Plastic (CFRP) Sheets
by M.N. Darwish
Role of Fibers in Controlling Failure Modes of High-Strength Concrete Beams
by M. Imam and L. Vandewalle
Shear Repair of Reinforced Concrete Beams Using Post-Tensioning
by A.R. Khaloo
Bonding Shear Strength of Adhesives Between Precast Concrete Elements
by M. Ali, S. Kurihara, and S. Matsui
Simplified Design Method for Ultimate Capacities of Circularly Confined High-Strength Concrete Columns
by S. Yuping and S. Kenji
Enhancement of Shear Strength for Reinforced Concrete Beams Using Externally Bonded Fiber-Reinforced Polymer Sheet
B.B. Adhikary and H. Mutsuyoshi
Development of Optical Fiber Sensor for Monitoring Concrete Performance
by H. Hamada, T. Yamaji, K. Hayakawa, and H. Yamashita
Seismic Retrofitting of Reinforced Concrete Bridge Piers and Concrete Members Using Thermographic Technique
by T. Kamada, T. Kawase, M. Kunieda, and K. Rokugo
Detection of Interfacial Flaws Between Steel Plates and Concrete Members Using Thermographic Technique
by T. Kamada, T. Kawase, M. Kunieda, and K. Rokugo
Improvement In Water Resistance of Polymer-Modified Gypsum-Based Composites
by Y. Ohama, K. Demura, M. Joo, T. Katsuhata, D. Sugawara, and D.W. Fowler
Deformation Demand of Precast Concrete Frame Building with Ductile Connection
by S.Y. Seo, N.M. Hawkins, and L.H. Lee
Nonlinear Strut-Tie Model Approach in Structural Concrete Deep Beams
by Y.M. Yun
Cyclic Inelastic Strut-Tie Modeling of Shear-Critical Reinforced Concrete Members
by J.H. Kim and J.B. Mander
Analaysis of Shear Damage Accumulation of Reinforced Concrete Beams Under Repetitive Fatigue Loadings
by B.H. Oh and S.H. Han
Durability Assessment of Concrete Bridge Slab Rehabilitated by Joint-Elimination Method
Mechanical Anchorage of Bars with Screw-Type Coupler and Perforated Plates in Precast Concrete Beam-Column Joint
by Y.C. You, K.D. Choi, K.H. Kim, and L.H. Lee
Analytical Evaluation of Structural Performance of Reinforced Concrete Beams Considering Degree of Reinforcing Bar Corrosion
by H.S. Lee and T. Noguchi, and F. Tomosawa
Strength Reduction Factors for Flexural Design of Concrete Beams Prestressed with Fiber-Reinforced Plastic Tendons
by S.M. Jeong
Shear Behavior of Beams Without Transverse Reinforcement
by S. H. Cho and L.H. Lee
Capactity Evaluation of Repaired Structural Walls Having Special Detailing for Moderate Seismic Zone
by S.W. Han, Y.M Lee, C.H. Oh, and L.H. lee
Proposal for Development of Positive Moment Reinforcement
by S.G. Hong and D.J. Kim
Overview of Anchorage Problems of Reinforcing Bars in High-Performance Silica Fume Concrete
by B.S. Hamad
Macro-Versus Micro-Mechanical Behavior of Plain and Steel Fiber Concrete Subjected to Internal Deformations
by P. Stroeven, D.H. Dalhuisen, and A.T. Moczko
Ferrocement Repaired Reinforced Concrete Beams Subjected to Quasi-Static and Cyclic Loadings
by C.T.E. Lim, K.C.G. Ong, and P. Paramasivam
Bridge Spatial Displacement Monitoring with Fiber Optic Deformatins Sensors
by S. Vurpillot, P. Kronenberg, and D. Inaudi
Strengthening of Reinforced Concrete Beams Using Prestressed Glass Fiber-Reinforced Plastic
by Y.L. Huang, T. Yen, J.H. Wu, and C.L. Ong
Rehabilitation of Moderately Damaged Reinforced Concrete Buildings After June 27, 1998 Ceyhan Earthquake
by G. Ozcebe, H. Sucuoglu, M.O. Spmivar, and T. Gir
Flexural Strength of Continuous Reinforced Concrete Beams with Externally Bonded Carbon Fiber-Reinforced Polymer Reinforcment
by S.A. El-Refaie, A.F. Ahour, and S.W. Garrity
Formulation of Optimal Strut-and-Tie Models in Design of Reinforced Concrete Structures
by M.A. Ali and R.N. White
Strengthening of Concrete Structures with Carbon Fiber-Reinforced Polymer and Results from Nondestructive Evaluation
by J.G. Parzych and P. Mtenga
Use of Stainless Steels 316LN and Duplex 2205 In Bridge Deck Construction in North America
by B.N. Neuhart
Influence of Corrosion on Bon Behavior of Reinforcement Bars
by Y. Auyeung, P. Balaguru, and L. Chung
Tensile Strength and Durability Performance of Cement-Based FRP Composite Wrapped Specimens
by H.A. Toutanji