Technical Questions

Question: Protecting against excessive expansion due to alkali-aggregate reaction (AAR)

Question: Tolerances for floors supporting operable partitions

Question: What steps are taken in the repair of concrete structures?

Question: What is mass concrete?

Question: The effect of aggregate characteristics on concrete shrinkage and permeability

Question: How can durable aggregates be ensured?

Question: Do we always need to repair cracked concrete?

Question: Acceptable concrete cracking

Question: Using core strength to calculate compressive strength of an existing structure

Question: How do the requirements of placing affect the selection of proportions of aggregates and cementi...

Question: How is the selection of mixture proportions affected by the materials to be used and the placing...

Question: What is the difference between corrected and uncorrected weight in a concrete mix design?

Question: Requirements for durable concrete

Question: The effect of joints on the durability of concrete structures

Question: Mixture design and strength submittals

Question: The ultimate objective in proportioning concrete

Question: The effect of aggregate shape on concrete strength

Question: The effect of aggregate grading on concrete strength

Question: Load factors used in the 1963 building code

Question: The effect of entrained air on the workability of concrete

Question: Characteristics of aggregate affecting concrete strength

Question: How is the required strength selected, measured, and obtained?

Question: Determining the cause of a crack

Question: The effect of maximum size of aggregate on concrete strength

Question: Improving the abrasion resistance of concrete

Question: Are epoxy resins widely used in concrete construction and repair?

Question: Is storing the specimens on the structure always a satisfactory procedure for estimating in-plac...

Question: The effect of aggregate on concrete durability

Question: The effect of surface texture and cleanness on concrete strength

Question: The effect of aggregate strength on concrete strength

Question: Is the cutting of cores or other shaped specimens directly from a completed structure ever used ...

Question: How are properties of concrete in the structure measured?

Question: The effect of pozzolans on shrinkage

Question: The effect of pozzolans on freezing and thawing resistance

Question: Protecting concrete from cycles of freezing and thawing

Question: The most important single factor affecting compressive strength

Question: What test conditions affect the results of compressive strength tests of concrete?

Question: How is the resistance to alkali-aggregate reaction (AAR) determined?

Question: Embedded metals other than reinforcing steel

Question: What does ACI recommend regarding water-cement (w/c) ratios or admixtures to improve workability...

Question: The importance of concrete cover

Question: Importance of using pozzolans in hydraulic and environmental structures

Question: The effect of pozzolans on water demand

Question: Specialty admixtures

Question: Can fresh concrete be used around aluminum framing or in aluminum molds??

Question: The effect of water-reducing admixtures on drying shrinkage

Question: What is involved in the process of mixture proportioning?

Question: What nominal maximum sizes of aggregate are recommended?

Question: Why are many non-destructive tests used as “estimators” of concrete strength?

Question: How should the appropriate fiber be selected for a specific application, and how is fiber dosage...

Question: Requirements for storing and handling aggregate

Question: What fibers are used in concrete?

Question: How does the relative amount of each ingredient used in concrete influence the properties of con...

Question: The basic approach used in the ACI mixture proportioning method

Question: What correction should be made for absorbed water and surface water carried by the aggregates?

Question: How can the effectiveness of curing be measured?

Question: ACI code for evaluating existing buildings prior to repair

Question: Substantial structural damage

Question: How does the type of fiber (material, shape, and form) impact the design methodology used for fi...

Question: Other important properties of concrete

Question: Are pozzolans all alike?

Question: Advantages of low-density aggregate

Question: What is shotcrete and when is it used?

Question: Are the proportions of ingredients inter-related to produce concrete of a given workability?

Question: Curing and curling of concrete slabs over vapor retarders

Question: Standards for 7-day and 28-day strength test results

Question: Size of test cylinder

Question: Definition of concrete, hydraulic cement, mortar, and grout

Question: Factors governing the strength of concrete

Question: The effect of air content on concrete strength

Question: Epoxy-coated reinforcement

Question: Pozzolans in mass concrete

Question: What range in slump is recommended for various types of construction?

Question: What are the ultrasonic pulse velocity and the pulse echo tests?

Question: Popouts or popoffs?

Question: Legacy building codes

Question: When should saw cuts be made on a concrete slab?

Question: What is slag cement or ground granulated blast-furnace slag (GGBFS)

Question: What does a pozzolan do in the concrete?

Question: Why is combined aggregate grading used?

Question: Are polymer concrete and polymer-modified concrete used in repairs?

Question: Increasing the load capacity of a slab-on-ground using an overlay

Question: Is chiseled concrete a common technique for facades

Question: Requirements for a successful concrete structure

Question: Why is Type IV cement rarely produced and Type V cement rarely used?

Question: What is a pozzolan?

Question: Important requirements of a concrete aggregate

Question: What are water-reducing admixtures?

Question: What are set-controlling admixtures?

Question: How are the relatively small dosages of an admixture measured reliably and placed in the mixer?

Question: Would adding more cement serve the purpose of admixtures?

Question: Commonly used accelerating admixture

Question: What is the intention of the ACI 318 Building Code?

Question: If time is not available for preliminary tests, how can the desired strengths be ensured?

Question: What allowance should be made for strengths where air-entrained concrete is to be used?

Question: How is concrete placed?

Question: Curling, shrinkage, and w/cm

Question: Aggregate blending

Question: Resistance to cycles of freezing and thawing

Question: Benefits of using slag cement

Question: Using and handling pozzolans

Question: What are shrinkage-compensating expansive cement and concrete?

Question: What is aggregate?

Question: Aggregate classification by density

Question: What is an admixture?

Question: What is an air-entraining admixture?

Question: Do different admixtures of a given type always perform the same?

Question: How can it be determined that an admixture will serve its intended purpose?

Question: What is the basis of proportioning to ensure concrete of the desired weather resistance?

Question: How is concrete consolidated?

Question: What is curing?

Question: How is strength estimated by the maturity method?

Question: Could a sulfate-resisting cement and slag cement be combined and used for concrete exposed to su...

Question: Will the use of fibers impact the compressive strength of the concrete?

Question: Strength of concrete

Question: The importance of proper drainage

Question: Are retarding admixtures reliable as to the time of setting?

Question: What is the purpose of finishing and texturing concrete surfaces?

Question: What is the importance of curing on strength?

Question: What tests are necessary or desirable in making a series of trial mixtures to arrive at a suitab...

Question: Are there any challenges or common issues encountered during the testing of fiber-reinforced con...

Question: Definition of low-density concrete

Question: What is fly ash?

Question: Can you use any source of water as mixing water?

Question: Precautions against sulfate attack

Question: What is meant by properly cured concrete?

Question: What are rebound, penetration resistance, and pullout tests?

Question: Placement of welded wire reinforcement (WWR) in a slab-on-ground

Question: Air tests for non-air-entrained concrete

Question: Air content common limits

Question: What is a natural pozzolan?

Question: What are blended cements?

Question: Do some water-reducing admixtures induce bleeding?

Question: How is workability measured and specified?

Question: Precautions to resist acid attack

Question: What methods are commonly used to ensure sufficient moisture for curing concrete?

Question: How does the temperature influence curing?

Question: When is steam curing used?

Question: How can the surface or free water carried by the aggregates be determined?

Question: When does the slump test provide a useful indication of workability?

Question: How is the shrinkage of concrete determined?

Question: What is D-cracking?

Question: Vapor barriers

Question: Joint deterioration mechanism and prevention

Question: What is the difference between synthetic microfibers and macrofibers?

Question: What are high-density aggregates?

Question: Why is the workability of concrete important?

Question: How is the water-cementitious material ratio (w/cm) expressed?

Question: What water-cementitious material ratio should be used for a particular job when strength require...

Question: What test is available to evaluate the behavior of no-slump concrete as it is vibrated?

Question: Is pulse velocity related to strength?

Question: What other uses are there for the pulse velocity?

Question: When can the finishing procedure be started?

Question: Is there any measure of the completeness or adequacy of curing?

Question: Can trial mixtures be made with full-size batches at the start of a job?

Question: Design Properties of Lightweight Concrete

Question: How do you mix fibers into concrete?

Question: How does the testing methodology for fiber-reinforced concrete differ from that of traditional c...

Question: The making of portland cement

Question: How is the permeability of concrete determined?

Question: How is the resistance to sulfate determined?

Question: Guidance on designing reinforced concrete retaining walls

Question: How is the abrasion resistance of concrete determined?